Avantco 224BCAC36 User Manual - Page 3
Browse online or download pdf User Manual for Merchandiser Avantco 224BCAC36. Avantco 224BCAC36 7 pages. 36/48" black curved dual service refrigerated air curtain merchandiser - 110v
Also for Avantco 224BCAC36: User Manual (10 pages)
Print Page
Installation
Please read this manual thoroughly prior to equipment set-up, operation and maintenance.
This unit is intended for use in a temperature-controlled environment less than 75 º F and
55% relative humidity. Malfunction due to improper conditions is not covered under warranty.
Important!!! Please Read Before Installation
•
If the unit has recently been transported on its side, please let the unit stand upright for a
minimum of 24 hours before plugging it in.
•
Make sure the unit has reached the desired temperature before loading the unit with products.
This unit is meant for keeping cold products cold, not chilling warm products.
• Make sure all accessories are installed (shelves, shelf clips, etc...) before plugging in the unit.
•
Do not attempt to remove or repair any component of the unit. Consult an authorized service
technician for servicing / repair.
• Do not stand inside the unit.
• Please read through this manual in its entirety.
This refrigerator is designed to perform in a temperature-controlled environment less than 75°F
•
and 5 5 % relative humidity. The unit should be located away from doors, air ducts, and fans
that could disrupt airflow and negatively impact performance.
Cabinet Location Guides
• Install the unit on a strong and leveled surface.
- If the surface is uneven, the unit may be noisy.
- The unit may malfunction if the surface is uneven.
• Install the unit in an indoor, well ventilated area away from doors, air ducts, and fans.
- For best performance, maintain 6" of clearance on the back of the unit at all times.
- Do not use outdoors. For indoor use only.
- Avoid direct sunlight.
• Avoid installation in a high humidity and / or dusty area.
- High humidity can cause the unit to rust and may decrease efficiency.
- Dust collected on the condenser coil may cause unit to malfunction.
-
Malfunction due to high ambient temperatures, humidity, or improperly maintained
condenser coil will void the warranty.
• Select a location away from heat and moisture-generating equipment.
- High ambient temperatures may cause the compressor to malfunction.
- Malfunction due to high ambient temperatures and humidity will void the warranty.
User Manual
- 3 -