CORNING LSE 6783 Instruction Manual - Page 3

Browse online or download pdf Instruction Manual for Laboratory Equipment CORNING LSE 6783. CORNING LSE 6783 8 pages. Digital water bath
Also for CORNING LSE 6783: Instruction Manual (9 pages)

Print Page
CORNING LSE 6783 Instruction Manual

1.0 Introduction

1.1 Overview

The Corning® LSE™ 6L digital water bath is a compact general purpose convection bath capable of uniformly heating samples up to a
maximum of 99°C.

1.2 Symbols and Conventions

This symbol indicates a potential risk and alerts you to proceed with caution.
The electrical warning symbol indicates the presence of a potential hazard which could result in electrical shock.
CAUTION: To avoid accidental bodily harming or burning be very careful touching the metal parts of the unit. It can be
very hot after it is used at high temperatures. Allow the metal parts to cool down before handling.

1.3 Safety Information

Configuring and operating this equipment requires precise knowledge and observance of the instructions in this instruction manual.
The equipment is designed only for its intended application.
WARNING: This is a warning of risk situations and dangers. Failure to observe this warning could be life-threatening.
These warnings must be heeded.
This equipment is designed for 230V/50 Hz or 120V/60 Hz. Make sure it is connected to the correct power supply.
Disconnect the power cord before carrying out maintenance or cleaning work.
The responsibility for operating the equipment lies exclusively with the owner or user if said equipment is incorrectly serviced, maintained,
altered by persons not employed by an authorized dealer, or if the equipment is used in a manner contrary to its specified purpose.
The equipment must be maintained and operated in accordance with this instruction manual.
Ensure this instruction manual is accessible at all times and has been read and understood by all users.

1.4 Package Contents

Corning LSE digital water bath, 6L

Power cord

Instruction manual


1.5 Specifications

Temperature Range
Controls
Chamber Maximum Load
Exterior Dimensions (W x D x H)
Without cover
With cover
Chamber Dimensions (W x D x H) 12.6 x 6.7 x 6.9 in. (32 x 17 x 18 cm)
Weight
Electrical
Cat. No. 6783
Cat. No. 6784
Fuse Specifications
Cat. No. 6783
Cat. No. 6784
Environmental Conditions
Ambient +5°C to 99°C
PID control
20 lbs. (9.09 kg)
14.9 x 11.4 x 9.0 in. (38 x 29 x 23 cm)
14.9 x 11.4 x 12.9 in. (38 x 29 x 33 cm)
19 lbs. (8.6 kg)
120V ±10%, 50/60 Hz, 4.8A
230V ±10%, 50/60 Hz, 2.4A
T 6.3 A L 250V
T 3.15 A L 250V
5°C to 40°C, 85% RH, non-condensing
Instruction Manual
|
1