Makita 4304 Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Power Tool Makita 4304. Makita 4304 20 pages. Variable speed
Also for Makita 4304: User Manual (8 pages)

Print Page

Installing the universal shank jig saw blade

CAUTION

Always be sure that the tool

switched off and unplugged before installing or removing

the blade.

If the universal blade clamp is used, you

can use blades of other makes which have

a universal shank like the one shown in

the figure, with

blade width

of 6.35 mm

(1 /4"

Insert the blade into the blade holder as far

as it will go. Make sure that the end of the

blade shank reaches the bottom of the

inner

s l i t

and tighten the bolt securely with

the hex wrench.

Selecting the cutting action

This tool can be operated with an orbital

or a straight line cutting action. To change

the cutting action, just turn the lever to the

desired cutting action position. Refer to

the table below to help determine the

appropriate cutting action.

The end of the blade

shank should reach the

bottom of the inner slit

Bolt