Garage Tek GT1006 Installation & Owner's Manual - Page 3

Browse online or download pdf Installation & Owner's Manual for Racks & Stands Garage Tek GT1006. Garage Tek GT1006 6 pages. Tall cabinet

Print Page
STEP 3A
CENTER
CONNECTING UNIT
"INSIDE"
STEP 3: ASSEMBLE CENTER CONNECTING SUPPORTS
A.
ALIGN AND PRESS THE PREVIOUSLY ASSEMBLED CENTER CONNECTING UNIT INTO THE BOTTOM PANELS (B) AS
SHOWN. USE A RUBBER MALLET AS REQUIRED.
B.
ALIGN AND PRESS THE HINGE CENTER SUPPORTS (S), QTY 2, INTO THE BOTTOM DOOR PANELS. ORIENTATE THE
WORD "INSIDE" ON THE HINGE CENTER SUPPORT TO THE INTERIOR OF THE CABINET.
C.
CHECK ALL THE PARTS HAVE THE INTERIOR CONNECTION TABS PROPERLY ENGAGED.
STEP 4: TOP ASSEMBLY
A.
PRESS PANELS (B), QTY 4, INTO THE TOP POSTS OF THE CENTER CONNECTING UNIT.
B.
PRESS PANELS (B), QTY 2, INTO THE TOP POSTS OF THE HINGE SUPPORTS (S), QTY 2.
C.
PRESS THE HINGE (E), QTY 2, INTO THE TOPS OF THE DOOR PANELS (B).
D.
ALIGN AND PRESS THE BASE/ TOP (A), QTY 1, POSTS INTO THE TOP PANELS. PRESS THE CAP (D), QTY4, INTO
THE BASE/TOP AS SHOWN.
S
S
STEP 4A
B
STEP 4D
A
D
STEP 4C
E
STEP
4B
PAGE 3 OF 6 REV SEPT 2021