Makita 4324 Instruction Manual - Page 3
Browse online or download pdf Instruction Manual for Power Tool Makita 4324. Makita 4324 16 pages. Jig saw
Also for Makita 4324: Parts Manual (2 pages), Instruction Manual (19 pages), Instruction Manual (10 pages)
![Makita 4324 Instruction Manual](/uploads/products/server2/2091077/2091077.png)
14.
REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking t o
see t h a t keys and adjusting wrenches are removed f r o m t o o l before turning
it on.
15. AVOID UNINTENTIONAL STARTING. Don't carry tool
with finger o n switch.
Be sure switch is
OFF
when plugging in.
16. EXTENSION CORDS. Make sure your extension cord is in good condition.
When using an extension cord, be sure t o use one heavy enough t o carry
the current your product will draw. A n undersized cord
will
cause a drop
in line voltage resulting in loss of power and overheating. Table 1 shows the
correct size t o use depending o n cord length and nameplate ampere rating.
If in doubt, use the next heavier gage. The smaller the gage number, the
heavier the cord.
TABLE
1
MINIMUM GAGE FOR CORD SETS
Total Length of Cord in Feet
0
-
6
6
-
10
10
-
12
12
-
16
I
0
-
25
I
26
-
50
I
51
-
100
1
101
-
150
18
16
14
16
16
14
12
14
12
Not Recommended
18
16
; :
1
12
Ampere Rating
More
Not More
Than
Than
A W G
17. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only
extension cords intended for use outdoors and
so
marked.
18.
STAY ALERT. Watch w h a t you are doing, use common sense. Don't operate
tool w h e n you are tired.
19. CHECK DAMAGED PARTS. Before further use of the tool, a guard or other
part that is damaged should be carefully checked t o determine t h a t it will
operate properly and perform i t s intended function. Check for alignment of
moving parts, binding of moving parts, breakage of parts, mounting, and any
other conditions that may affect its operation.
A
guard or other part t h a t
is damaged should be properly repaired or replaced by an authorized serv-
ice center unless otherwise indicated elsewhere in this instruction manual.
Have defective switches replaced by authorized service center. Don't use
tool if s w i t c h does not turn
it
o n and off.
20.
GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded
surfaces. For example; pipes, radiators, ranges, refrigerator enclosures.
21. REPLACEMENT PARTS. When servicing, use only identical replacement parts.
22.
POLARIZED PLUGS.
To
reduce the risk of electric shock, this equipment has
a polarized plug (one blade is wider than the other). This plug will f i t in a
polarized outlet only one way. If the plug does n o t f i t fully in the outlet,
reverse the plug. If
it
still does n o t fit, contact a qualified electrician t o install
the proper outlet. Do n o t change the plug in any way.
3