CORNING Centrix Jumper Routing - Page 12

Browse online or download pdf Jumper Routing for Network Hardware CORNING Centrix. CORNING Centrix 20 pages. System splitter/cwdm cassette installation
Also for CORNING Centrix: Instructions Manual (8 pages), Quick Start Manual (2 pages)

Print Page
CORNING Centrix Jumper Routing
3.2.
Cross-connecting Jumpers in Adjacent Front Cable
Access Frames
When cross-connecting jumpers to adjacent front cable access frames,
use a length of 6 m (16.25 ft), plus 1.0 m (3.3 ft) for every additional
frame passed.
• Always use lower troughs to transition between frames.
• Distribute fiber between different hubs in the inter-bay unit (IBU) to
minimize fiber loading.
TPA-4451-EMEA
Figure 10
STANDARD RECOMMENDED PROCEDURE 003-960 | ISSUE 4 | OCTObER 2017 | PAGE 10 OF 18