Makita 4341FCT Hardware Technical Information - Page 5
Browse online or download pdf Hardware Technical Information for Power Tool Makita 4341FCT. Makita 4341FCT 14 pages. Jig saw
Also for Makita 4341FCT: Specifications (2 pages), Parts Breakdown (3 pages), Instruction Manual (13 pages)
Print Page
R
epair
< 6 > Assembling gear housing cover section
1. Assemble tool opener to gear housing cover with referring to Fig. 1A and Fig. 2 at page 3.
2. Put leaf spring in gear housing cover, paying attention to its assembling direction as illustrated in Fig. 7.
And insert rod into gear housing cover, paying attention to the direction of hook of blade holder
as illustrated in Fig. 7A.
Tool opener
Blade
holder
Fig. 7
3. Align the hole of slider and the same of rod, and insert pin 4 into the aligned holes from left side as illustrated
in Fig. 8.
Stand slider and insert a pair of linear guide as illustrated in Fig. 8A.
4. Lifting up leaf spring, lay a pair of linear guide in order to position leaf spring on linear guides as illustrated
in Fig. 9.
And push slider to the center of linear guides. Fasten linear guides with 4 pcs. of pan head screws
M4 x 10 as illustrated in Fig. 9A.
Push slider to the
center of linear guides.
Gear housing cover.
Leaf spring
The rolling portion has to be
faced to gear housing side.
Gear housing side
Rod
Blade holder's hook
Rod inserted into
gear housing cover
Slider
Fig. 8
Lay linear guides.
Lift up leaf spring.
Pan head screws M4x10
Blade holder
Gear housing cover
Tool opener
Slider, stood for setting
a pair of linear guide
Slider
Rod
Pin 4
(Insert it from left side.)
Linear guide
Fig. 9
Fig. 9A
P 5 / 14
Blade holder's hook has
to contact with tool opener,
when detaching the blade
with tool opener.
Fig. 7A
Linear guides
Rod
Slider
Fig. 8A
Slider
Leaf spring