Makita 5093DZ Instruction Manual - Page 15

Browse online or download pdf Instruction Manual for Power Tool Makita 5093DZ. Makita 5093DZ 20 pages. 85 mm (3-3/8”)

Print Page

Sighting

The front of the base is notched to provide

two guide edges.

For straight cuts, align the edge with 0"

engraved on it with your cutting line on the

workpiece.

For

45"

bevel cuts, align the edge with

45"

engraved on it with your cutting line.

For straight cuts

For 45" bevel cuts

Cutting line

Switch action

CAUTION:

Before inserting the battery cartridge into the tool, always check to see that the switch

trigger actuates properly and returns to the "OFF" position when released.

To prevent the trigger from being acciden-

tally pulled, a lock-off lever is provided.

To start the tool, slide the lock-off lever in

the direction of the arrow and pull the trig-

ger. Release the trigger to stop.

Operation

Hold the tool firmly. Set the base plate on

the workpiece to be cut without the blade

making any contact. Then turn the tool on

and wait until the blade attains full speed.

Now simply move the tool forward over

the workpiece surface, keeping it flat and

advancing smoothly until the sawing is

completed. To get clean cuts, keep your

sawing line straight and your speed of

advance uniform.

CAUTION:

Lock-off lever

I \

Base

*Always gently keep the tool moving straight ahead when cutting. Forcing or twisting the

tool will result in overheating of the motor and dangerous kickback, possibly causing

severe injury.

*If the tool is operated continuously until the battery cartridge has discharged, allow the

tool to rest for

minutes before proceeding with a fresh battery.