Makita 5620D Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Power Tool Makita 5620D. Makita 5620D 12 pages.

Print Page

FUNCTIONAL

DESCRIPTION

1. Battery cartridge

2. Button

1. Lever

1. Clamping screw

2. Bevel scale plate

1. Base

2. Cutting line

CAUTION:

•

Always be sure that the tool is switched off and the battery cartridge is

removed before adjusting or checking function on the tool.

Installing or removing battery cartridge

001328

•

Always switch off the tool before insertion or removal of the battery

cartridge.

•

To remove the battery cartridge, withdraw it from the tool while pressing

the buttons on both sides of the cartridge.

•

To insert the battery cartridge, align the tongue on the battery cartridge

with the groove in the housing and slip it into place. Always insert it all

the way until it locks in place with a little click. If not, it may accidentally

fall out of the tool, causing injury to you or someone around you.

•

Do not use force when inserting the battery cartridge. If the cartridge

does not slide in easily, it is not being inserted correctly.

Adjusting depth of cut

001351

CAUTION:

•

After adjusting the depth of cut, always tighten the lever securely.

Loosen the lever on the side of the rear handle and move the base up or

down. At the desired depth of cut, secure the base by tightening the lever.

For cleaner, safer cuts, set cut depth so that no more than one blade tooth

projects below workpiece. Using proper cut depth helps to reduce potential for

dangerous KICKBACKS which can cause personal injury.

Bevel cutting

001368

Loosen the clamping screw on the bevel scale plate on the front of the base.

Set for the desired angle (0° - 50°) by tilting accordingly, then tighten the

clamping screw securely.

Sighting

001386

For straight cuts, align the A position on the front of the base with your cutting

line. For 45° bevel cuts, align the B position with it.