Bernina Record 830 Workbook - Page 13

Browse online or download pdf Workbook for Accessories Bernina Record 830. Bernina Record 830 16 pages. Workbook 3 creative options
Also for Bernina Record 830: Software Update (14 pages), Brochure (2 pages), Instructions And Tips (4 pages)

Print Page

Firm woven fabric, 6" x 6" and

Fabric:

Heavyweight tear-away stabilizer, 6" x 6"

80/12 Universal

Needle:

30 wt. cotton embroidery

Thread:

center

Needle Position:

BERNINA Presser Foot:

artista 730

▪ Touch the Combi-Mode icon

▪ Select Monograms from the Alphabet menu; select two or

three letters of your choice.

▪ Scroll up to place the cursor at the lower edge of the first letter.

▪ Select stitch #39 to insert the first directional stitch and to

activate the compass. Locate the ending mark (red "+") on

the first letter and the beginning mark (green "o") on the

second. With the cursor positioned at the bottom of the first

directional stitch, move the red compass line until it is in the

correct direction.

▪ Touch stitch #39 to insert a second directional stitch.

▪ Touch the Multi Function icon; select Preview.

▪ Touch the Binocular icon to view a virtual representation of

the letter placement. If the first letter is too close to the next

one, touch esc and insert additional directional stitches as

needed.

▪ Preview the combination and continue adding and adjusting

stitch direction until the letter placement is correct.

▪ Add the Long Stitch function to each directional stitch.

▪ Add the Securing function to the beginning and end of the

combination.

BERNINA 830

▪ Touch Combi-Mode icon; select desired Alphabet, then letters.

▪ Move (Drag and Drop) the monograms into place on the screen.

▪ Select the Multi-function icon; select Connecting Stitches icon.

Note: For more informationon this process see the Trailing Tulip

Vines exercise on page 12.

Stitching the Monogram

Place stabilizer behind fabric; mark parallel guide lines

about 1" apart on the fabric as a reference for guiding

during the stitching process.

Position the stabilized fabric under Sideways Motion

Foot #40C. Engage Pattern Begin and Pattern Repeat 1x.

As you stitch, guide the fabric, keeping the sides of presser

foot parallel to the guiding lines drawn on the fabric. Clip and

remove the basting stitches between the monogram letters.

7/27/11

artista 730 and BERNINA 830 only

Sideways Motion Foot #40C

Monograms

Monogram Sizes

BERNINA 830

1 = 30mm (1.18")

2 = 20mm (0.8")

3 = 15mm (0.6")

Tips

When sewing Sideways Motion stitches

use the slide-on table to increase the

sewing surface.

Make sure that the fabric is fed evenly and

lightly, ensuring that it cannot push against

or catch on anything. It is important to let

the sewing computer sew, without pulling,

pushing or holding back the fabric.

Do you know how to:

▪ Draw guidelines for directional stitching?

▪ Find the starting and ending points for

the monogram letters?

artista 730

1 = 30mm (1.18")

2 = 20mm (0.8")

3 = 10mm (0.4")