JAMEC PEM PRO Series Operating Instructions Manual - Page 4
Browse online or download pdf Operating Instructions Manual for Tools JAMEC PEM PRO Series. JAMEC PEM PRO Series 8 pages. Air hose reel
Also for JAMEC PEM PRO Series: Operating Instructions (3 pages), Operating Instructions (4 pages), Operating Instructions (4 pages), Operating Instructions (2 pages), Operating Instructions (3 pages)
Print Page
ADJUSTING THE STOP-BALL
The location of the hose stopper can be
adjusted to allow more hose or less hose to
be exposed when fully rewound.
1. Pull out the desired length of hose, ensuring
the hose reel is in the lock position.
2. Open the latch on the hose stopper and
move it to the desired position on the hose.
3. Re-latch the hose stopper at desired
position
CAUTION:
Always make sure the hose reel is in the
locked position before removing the hose
stopper and make sure the hose stopper is
securely fastened before unlocking the reel.
SPECIFICATIONS
Part
Hose
No.
Length
58.3067
8 m
58.4023
8 m
MAINTENANCE
• Always keep the hose clean.
• If the hose becomes dirty, clean it with
a damp cloth while retracting.
• DO NOT twist the hose while in use.
• Mount the hose reel in a sheltered area to
assist and protect the performance of the
hose and hose reel.
Hose
Working
Material
Pressure
Extreme Ultraflex
Max. 300 p.s.i.
Reinforced
(20 BAR)
Extreme Ultraflex
Max. 150 p.s.i.
Reinforced
(10 BAR)
Hose
Hose
I.D.
O.D.
9.2 mm
15.2 mm
10.5 mm
16.5 mm
• DO NOT allow the hose to contact any
corrosive chemicals or fluids.
• Always retract the hose when not in use.
• The Jamec Pem Hose Reel contains a
pre-tensioned spring inside the inner drum
assembly.
Do not attempt to open the inner drum
assembly.
Leader
Inlet
Hose
Size
1 m
1/4" BSP
1 m
12mm
tap fitting