Makita 5903R Instruction Manual - Page 8

Browse online or download pdf Instruction Manual for Power Tool Makita 5903R. Makita 5903R 13 pages. 165/190/235 mm
Also for Makita 5903R: Instruction Manual (13 pages), Manual (15 pages), Instruction Manual (13 pages), Instruction Manual (12 pages), Instruction Manual (13 pages), Instruction Manual (16 pages), Instruction Manual (13 pages)

Print Page

1. Maintenance

when use the tool.

SAVE THESE INSTRUCTIONS.

WARNING:

MISUSE or failure to follow the safety rules stated in

this instruction manual may cause serious personal

injury.

FUNCTIONAL DESCRIPTION

CAUTION:

Always be sure that the tool is switched off and

•

unplugged before adjusting or checking function on

the tool.

Adjusting depth of cut

005392

CAUTION:

After adjusting the depth of cut, always tighten the

•

lever securely.

Loosen the lever on the depth guide and move the base

up or down. At the desired depth of cut, secure the base

by tightening the lever.

For cleaner, safer cuts, set cut depth so that no more

than one blade tooth projects below workpiece. Using

proper cut depth helps to reduce potential for dangerous

KICKBACKS which can cause personal injury.

Bevel cutting

005393

For model 5603R, 5703R,5705R, 5903R, 5103R

Loosen the clamping screws in front and back, and tilt

the tool to the desired angle for bevel cuts (0° - 45°).

Secure the clamping screws tightly in front and back

1. Lever

1. Clamping screw

after making the adjustment.

For model 5143R

Loosen the clamping screw in front and tilt the tool to the

desired angle for bevel cuts (0 - 60°). Secure the

clamping screw tightly in front after making the

adjustment.

Sighting

For 5603R, 5703R,5705R, 5903R, 5103R

5603R,5703R,5705R

005394

5903R/5103R

005449

For straight cuts, align the A position on the front of the

base with your cutting line. For 45° bevel cuts, align the

B position with it.

For 5143R

005396

Align your sight line with either the 0° notch for straight

cutting or the 30° notch for 30° angle cuts or the 45°

notch for 45° angle cuts or the 60° notch for 60° angle

cuts.

1. Base plate

1. Top guide

2. Base

1. 60 ﾟ angle cuts

2. 45 ﾟ angle cuts

3. 30 ﾟ angle cuts

4. Straight cuts

5. Blade

6. Base

7. Top guide