Frigor CIF 45 User Manual - Page 8

Browse online or download pdf User Manual for Freezer Frigor CIF 45. Frigor CIF 45 16 pages. Display

Print Page

CIF

Display Freezer

Start-up of the cabinet

Before use, we recommend that the cabinet is cleaned, see the section on maintenance and cleaning.

Important !

If the cabinet has been vertically placed during transport, please wait 2 hours before starting up the

cabinet.

2 distance pieces are included for mounting on the back of the freezer. These ensure that the freezer

is sufficiently ventilated. They should be fitted in the predrilled holes as shown on the photo.

The temperature can be adjusted by using the thermostat button at the back of the cabinet.

Set to position 5 on the thermostat scale. Place a thermometer approx. 10 cm inside the cabinet on

the top shelf and check the temperature once it has achieved steady conditions. Turn the thermostat

button clockwise if the temperature is too high or anti-clockwise of the temperature is too low.

A layer of frost gradually forms inside the cabinet. When the layer is 3 mm thick it should be

scraped off using a plastic scraping implement, and removed from the cabinet without switching

off. The cabinet is then ready for use again. If the cabinet is dirty inside, it should be switched off

at the mains so the layer of frost can melt before cleaning commences.

Livøvej 22 - 8800 Viborg - Tlf. 86 61 34 11 - [email protected] - www.vibocold.dk