Avantes DA-SHUTTER Operation And Installation Manual - Page 4

Browse online or download pdf Operation And Installation Manual for Industrial Equipment Avantes DA-SHUTTER. Avantes DA-SHUTTER 5 pages. Accessories

Print Page

The following interface cables are available to connect the DA-SHUTTER to any Avantes AvaSpec-

USB2/EVO platform:

IC-DB26-DA-AS-SHUTTER-0.6 Length = 0.6m

IC-DB26-DA-AS-SHUTTER-2

Pin description of an interface cable connector

Description

Shutter Open/Close (High = Open, Low = Close)

GND

Pin 3 is connected to DO4 of the DB26 connector.

2.3 Parts included

1. Direct-attach Fiber-Optic Shutter DA-SHUTTER with a control box

2. Allen Key 1.3mm

2.4 Parts not included

1. Interface cable IC-DB26-DA-AS-SHUTTER-0.6 (or IC-DB26-DA-AS-SHUTTER-2)

2. Power Supply PS-12V/2.08A

These parts can be ordered separately at Avantes.

2.5 Starting up

1. Plug in the PS-12V/2.08A power supply.

2. Plug in the connector of the power supply into the socket of the control box.

3. Screw the DA-Shutter onto the SMA input of the spectrometer.

4. Connect the SMA-connector of your fiber to the Fiber input of DA-SHUTTER.

5. Connect the IO connector of the DA-Shutter to the control box.

6. For automatic TTL-shutter control connect interface cable IC-DB26-DA-AS-SHUTTER-0.6 (or

IC-DB26-DA-AS-SHUTTER-2) plug in connector and connect to AvaSpec spectrometer

7. Connect the connector of the IC-DB26-DA-AS-SHUTTER-0.6 (or IC-DB26-DA-AS-SHUTTER-2)

into the control box and lock the connector with the screw terminal.

8. For Automatic save-dark for DA-SHUTTER use AvaSoft full:

In 'Spectrometer settings'

Dark' (see the picture below).

Revision: 2-00

Length = 2.0m

in the 'Digital IO' tab, enable the 'TTL Shutter on Save

www.avantes.com