Makita 6924N Instruction Manual - Page 7

Browse online or download pdf Instruction Manual for Power Tool Makita 6924N. Makita 6924N 8 pages. Shear wrench
Also for Makita 6924N: Instruction Manual (8 pages), Instruction Manual (20 pages)

Print Page

► 1 . Remaining length

CAUTION:

•

Use bolts with the remaining length within the

range shown in the table above as bolts with

different size have different maximum and min-

imum remaining length. Be careful not to use

bolts beyond the specified range which causes

the tool damage

MAINTENANCE

CAUTION:

•

Always be sure that the tool is switched off and

unplugged before attempting to perform inspec-

tion or maintenance.

•

Never use gasoline, benzine, thinner, alcohol

or the like. Discoloration, deformation or cracks

may result.

Replacing carbon brushes

► 1 . Limit mark

Remove and check the carbon brushes regularly.

Replace when they wear down to the limit mark. Keep

the carbon brushes clean and free to slip in the holders.

Both carbon brushes should be replaced at the same

time. Use only identical carbon brushes.

Use a screwdriver to remove the brush holder caps.

Take out the worn carbon brushes, insert the new ones

and secure the brush holder caps.

► 1 . Screwdriver 2. Brush holder cap

To maintain product SAFETY and RELIABILITY, repairs,

any other maintenance or adjustment should be per-

formed by Makita Authorized Service Centers, always

using Makita replacement parts.

OPTIONAL

ACCESSORIES

•

If you need any assistance for more details regard-

ing these accessories, ask your local Makita Service

Center.

NOTE:

•

7 ENGLISH

CAUTION:

These accessories or attachments are recom-

mended for use with your Makita tool specified

in this manual. The use of any other accessories

or attachments might present a risk of injury to

persons. Only use accessory or attachment for

its stated purpose.

Sleeve

Bolt size

Outer sleeve

M22

Inner sleeve

M22

Outer sleeve

M24

Inner sleeve

M24

Outer sleeve

Inner sleeve

Outer sleeve

Inner sleeve

Some items in the list may be included in the

tool package as standard accessories. They

may differ from country to country.

Length (mm)

7/8"