Avantgarde DUO SD User Manual - Page 12

Browse online or download pdf User Manual for Speakers Avantgarde DUO SD. Avantgarde DUO SD 19 pages.

Print Page
Avantgarde DUO SD User Manual
CONNECTION – SUBWOOFER DSP AMP
PASSIVE VERSION – SPEAKER LEVEL INPUTS
VOL
CLIP
SIG
VOL
SPEAKER TYPE
UNO G3
DUO G3
PUSH
DSP PROGRAMMING
MODEL NO.
ITRON AMP
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
SERVICE USE ONLY
+ 1.5
+ 1.5
+ 1.5
0dB
ENGAGED
FUSE
– 1.5
– 1.5
– 1.5
RESET
MID
HIGH
IN
OUT
E FUSE
DRIVER GAIN
BALANCED INPUT
GROUND
OUT
IN
B
C
A
D
RESET
12V DC
ENGAGED
MODE
POWER
TRIGGER
E FUSE
1
In the passive version, the speaker is operated via an external power
amplifier. This amplifier is connected to the speaker MID connector
of the speaker via a high-quality speaker cable.
2
The jumper cable (included in the accessory box) is used to connect
FUSE
the signal from the speaker HIGH connector of the speaker (see
page 16) to the speaker level input � of the DSP subwoofer ampli‐
fier.
5
Only now, connect the AC power � of the components to a
3
household AC outlet and turn on � the subwoofer DSP amplifier.
FUSE
4
WARNING
ELECTRICAL SHOCK HAZARD
SPEAKER TYPE
UNO SD
DUO SD
DO NOT OPEN!
MODEL NO.
BASSAMP-G3-500
110 – 240V ~ 50/60HZ
ORIGIN
MADE IN GERMANY
MAX POWER CONSUMPTION – 550W
POWER OUTPUT – 500W RMS
only to be used with marked speaker type
FUSE 4.0 A SLOW
DSP
SERVICE USE ONLY
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 570W
POWER OUTPUT – 530W RMS
FUSE 2.5 A SLOW
+ 3
+ 6
0dB
0dB
– 3
– 6
SPEAKER LEVEL INPUT
TOTAL GAIN
PUSH
SPKR
MUTE
XLR
TOGGLE
INPUT
OUTPUT
FUSE
DIMMER
BALANCED SIGNAL
INPUT SELECT
CONNECTION – SUBWOOFER DSP AMP
ITRON VERSION – BALANCED XLR INPUT
1 1
SPEAKER TYPE
UNO G3
DUO G3
PUSH
MODEL NO.
ITRON AMP
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
SERVICE USE ONLY
+ 1.5
+ 1.5
0dB
ENGAGED
FUSE
– 1.5
– 1.5
RESET
MID
HIGH
IN
E FUSE
DRIVER GAIN
GROUND
12V DC
Line level connections feature balanced XLR connectors/terminals.
PUSH
The pin assignment of these follows the EIA RS-297-A standard:
2
1
PIN 1 = GND, PIN 2 = HOT, PIN 2 = COLD. Never use cables with
3
differing pin assignment! This will deteriorate the sound quality and
can damage the amplifiers and/or the active power modules of the
FUSE
subwoofers.
In the active iTRON version, the loudspeaker is driven by an external
1
preamplifier. For this purpose, the line-level output of the preampli‐
fier is connected to the balanced line-level input of the iTRON am‐
plifier with an XLR cable (see page 18).
2
The XLR jumper cable (included in the delivery box) connects the
balanced XLR daisy chain output of the iTRON amplifier to the ba‐
lanced XLR input � of the DSP subwoofer amplifier.
5
Only now, connect the AC power � of the components to a
3
household AC outlet and turn on the ITRON module � and the
FUSE
subwoofer DSP amplifier.
4
22
23
SPEAKER TYPE
UNO SD
DUO SD
MODEL NO.
BASSAMP-G3-500
VOL
ORIGIN
MADE IN GERMANY
only to be used with marked speaker type
CLIP
SIG
DSP
SERVICE USE ONLY
VOL
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
DSP PROGRAMMING
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 570W
POWER OUTPUT – 530W RMS
FUSE 2.5 A SLOW
+ 1.5
+ 3
+ 6
0dB
0dB
– 1.5
– 3
– 6
SPEAKER LEVEL INPUT
OUT
BALANCED INPUT
TOTAL GAIN
PUSH
OUT
IN
B
C
A
D
RESET
ENGAGED
MODE
TOGGLE
INPUT
FUSE
POWER
TRIGGER
E FUSE
DIMMER
BALANCED SIGNAL
1 2
1 3
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT OPEN!
110 – 240V ~ 50/60HZ
MAX POWER CONSUMPTION – 550W
POWER OUTPUT – 500W RMS
FUSE 4.0 A SLOW
SPKR
MUTE
XLR
OUTPUT
INPUT SELECT