Avantgarde SPACEHORN User Manual - Page 8
Browse online or download pdf User Manual for Speakers Avantgarde SPACEHORN. Avantgarde SPACEHORN 18 pages.
Print Page
CONNECTION – TRIO G3 PASSIVE VERSION
SINGLE–WIRING
1 4
1 5
1 1
Tweeter
, midrange
speaker terminals. In the standard conf iguration, these terminals
are interconnected with two OFC Trident Bridge
interconnects all "+" connectors, the other one
connectors.
Connect the speaker terminal
1
speaker-level input terminal of the SPACEHORNS with the long
jumper cable. The jumper cable is included in the accessory box.
2
If you use more than 1 x subwoofer per channel, connect speaker-
level input terminal of the SPACEHORNS No.1
input terminal of the SPACEHORNS No.2 with the shorter jumper
cable. The jumper cable is included in the accessory box.
The jumper cables have hollow banana plugs which are open at
�
the rear. This way it is possible to stack multiple speaker cables to
the same speaker terminal.
3
Connect the Speaker–Output of your power (or integrated)
amplif ier with the speaker MID terminal
4
Only now, connect the AC power cords of the components to a
household AC outlet and turn on the subwoofer and the other
equipment.
The cable at the INTERNAL CONNECT PORT is a non-serviceable
�
internal connection! Do not unplug.
1 6
1 2
and lowrange
drivers have dedicated
&
. One bridge
all "–"
of the TRIO G3 speakers and the
and speaker-level
of the TRIO G3 speakers.
CONNECTION – TRIO G3 PASSIVE VERSION
TRI–WIRING
1 4
To operate the system in TRI–Wiring or TRI–Amping mode, the two
OFC Trident Bridge
Open the screw caps of Tweeter
1
speaker terminals and remove the two OFC Trident Bridges
Connect the Speaker–Output of your power (or integrated)
2
amplif ier with the speaker terminals
using a dedicated cable for each connection. The same applies
when using multiple amplif iers for treble, midrange and bass.
14
15
1 5
1 6
&
need to be removed.
, midrange
of the TRIO G3 speakers
and lowrange
&
.