Makita 9910 Technical Information - Page 3
Browse online or download pdf Technical Information for Power Tool Makita 9910. Makita 9910 5 pages. 76mm
Also for Makita 9910: Parts Breakdown (3 pages), Instruction Manual (17 pages), Parts Breakdown (3 pages), Instruction Manual (13 pages), Instruction Manual (8 pages), Instruction Manual (8 pages), Instruction Manual (17 pages)
Print Page
5)
Turn the fan 68 in clock wise direction to remove
it while fixing the fan 60 for cooling the motor.
(Note) Since the fan 68 is mounted with anti-clock wise
screw, turn in clock wise to remove.
6)
Remove the scroll plate.
7)
Use the resin hammer to slightly hammer the armature shaft from the commutator side to
disconnect the armature.
(2) Disassembling of gear
1)
In the same manner as replacing of armature, remove the housing R, belt cover and synchro belt 6-300.
2)
Remove the shoe, and the driving roller will be exposed.
3)
Use the spanner 10 to fix the hexagon point of pulley
8.5-45.1 and turn the driving roller in the direction
whereby anti-clock wise screw can be loosened, and
either of the pulley 8.5-45.1 or driving roller is
loosened and then removed.
4-A) If the pulley 8.5-45.1 has been successfully removed,
A-a)
Loosen the 4 pieces of tapping screw PT4x25 for
mounting the bracket to remove the bracket.
A-b)
Insert the lock nut wrench 20 through the two
holes on the helical gear 31, fix the helical gear
31, and then turn the driving roller in a direction
whereby the left-handed screw can be loosened.
A-c)
If the ball bearing 626 and driving roller have been successfully removed, use the resin hammer to
slightly hammer the helical gear 31 complete from the direction of ball bearing 626 mounting side to
remove the helical gear 31 complete.
4-B) If the driving roller has been loosened and successfully removed along with the ball bearing 626,
B-a)
Set the spanner 10 on the hexagon point of pulley 8.5-
45.1, insert the spanner 7 in the two faces on driving
shaft, and then turn them in the direction whereby the
right-handed screw can be loosened, and the pulley
8.5-45.1 can be removed.
B-b)
Loosen the 4 pieces of tapping screw PT4x25 for
mounting the bracket to remove the bracket.
B-c)
Use the resin hammer to slightly hammer the helical gear 31 complete from the direction of ball
bearing 626 mounting side to remove the helical gear 31 complete.
Fan 68
Steel plate
Synchro belt 6-300
Pulley 8.5-45.1
Spanner 10
Lock nut
wrench 20
Pulley 8.5-45.1
Spanner 10
Scroll plate
Carbon brush
Holder cap
Bracket
Driving roller
Ball bearing 626
Hexagon point
Driving roller
Ball bearing 626
Two holes on the
helical gear 31
Driving shaft
Two faces
Spanner 7
Hexagon point