BERNSTEIN G30014A Assembly Instructions Manual - Page 12
Browse online or download pdf Assembly Instructions Manual for Plumbing Product BERNSTEIN G30014A. BERNSTEIN G30014A 16 pages. Support frame for wash basins
Print Page
Back of basin
Measure the distance ´X` between the centres of the basin
fixing holes. Insert the basin fixing bolts into the sliding
plates, position centrally on the frame and space apart to
match the basin fixing holes. Tighten the fixing bolts with a
large screwdriver and cut to length if required.
Carefully lift and position the basin onto the basin fixing
bolts. Loosen the connection height adjustment bolts, set
the connection support bar to the required height to line up
with the waste outlet elbow. Retighten the bolts and remove
the basin.
4
SUPPORT FRAME G30014A
Basin fixing holes
Attach the waste, trap and mixer/tap, to the basin.
Note: A typical Bathstore adjustable chrome plated
bottletrap is shown (designs may vary). The trap height is
vertically adjustable, adjust the trap to allow some up and
down adjustment in the final assembly.
Prepare and connect the waste water outlet (a push-fit
waste is recommended).
Note: The waste outlet elbow can be rotated to take the
waste water pipework by loosening the bolts shown. Secure
the pipework in the void.