ALIBI ALI-QVR3016H Quick Setup Manual - Page 3

Browse online or download pdf Quick Setup Manual for DVR ALIBI ALI-QVR3016H. ALIBI ALI-QVR3016H 4 pages. 4/8/16-channel ahd, hd-tvi, 960h analog and ip camera recorder ali-qvr3000h series

Print Page

By default, the Setup Wizard will open automatically. Refer to the Alibi Embedded Network Video Recorder Firmware V3.4.x User

Manual for complete instructions for using the Wizard and configuring and using your DVR.

Important Notes for using the Wizard:

Password: When logging into the recorder for the first time, create a "Strong" administrator user password. Follow the on-screen

•

instructions, and save this password and the GUID file created by the firmware in a secure location. NOTE: There is no factory default

password for this device.

Date and Time: Set the time zone, date and time correctly. All recorded video and capture (photo) files are time stamped.

•

Storage - HDD: In the HDD Management wizard, if a new recorder is shipped with a pre-configured HDD, nothing needs to be done

•

with it in this window. If you installed an HDD or replaced the HDD, that HDD needs to be initialized by the recorder before it can be used

to record data. Select (check the box for) that HDD, then click Init to initialize the disk. NOTE: Init will erase all data from the disk and

can take several minutes to complete. When the initialization is complete, click Next to continue.

Network Settings: By default, the recorder acquires it's network settings using DHCP (dynamic network settings). Depending on the

•

configuration of the network, these settings may change. To improve remote access to the recorder, Observint recommends that you

configure the DVR with fixed network settings. To easily change the DHCP acquired network settings to fixed network settings,

un-check the Enable DHCP option in the network setup menu, and then click Apply.

Step 7. Access the Menu system

After the initial setup of your QVR using the Wizard, the Menus interface enables you to refine your configuration settings and expand the

functionality of the system. To use most menus, the user must log into the NVR system, either locally or remotely, with administrative

privileges. To open the Menu system from the Live View screen, right click anywhere in the screen, then select Menu.

www.Observint.com

If ID Authentication is not disabled (see the Menu | Configuration | General settings), a login window will open. In the Login window,

select a User Name with administrative privileges, enter its password, then click OK. A window of Menu icons will open.

For additional information about using your system, refer to the ALIBI Embedded Network Video Recorder Firmware V3.4.x User

Manual.

Specifications

Model

ALI-QVR3004H

Video compression

H.264

4-ch

Video input

BNC interface (1.0 Vp-p, 75 Ω), supporting coaxitron connection

Supported HDTVI input

1080p / 25Hz, 1080p / 30Hz, 720p / 25Hz, 720p / 30Hz, 720P / 50Hz, 720p / 60Hz

Supported AHD input

720p / 25Hz, 720p / 30Hz

CVBS input

Support

IP video input

1-ch, up to 2.0 MP resolution

Audio compression

G.711u

Audio input

1-ch, RCA (2.0 Vp-p, 1 KΩ)

CVBS output

Support

1-ch, 1920 × 1080 / 60 Hz, 1280 × 1024 / 60 Hz, 1280 × 720 / 60Hz, 1

HDMI / VGA output

024 × 768 / 60 Hz

When 1080p Lite mode is not enabled: 1080p (non-real-time) / 720p / VGA / 960H / 4CIF / CIF;

Encoding resolution

When 1080p Lite mode enabled: 1080p lite / 720p lite / VGA / 960H / 4CIF / CIF

Main stream: 1/16 fps to real time frame rate

Frame rate

Sub-stream: 960H / 4CIF@12fps / 2CIF (non-real-time); CIF / QVGA / QCIF (real time)

Video bit rate

32 Kbps to 6 Mbps

Audio output

1-ch, RCA (Linear, 1 KΩ)

Audio bit rate

64 Kbps

Dual-stream

Support

Stream type

Video, Video and Audio

ALI-QVR3008H

ALI-QVR3016H

8-ch

16-ch

2-ch, up to 2.0 MP resolution

1-ch, 4K (3840 × 2160) / 30Hz,

2K (2560 × 1440) / 60Hz,

1920 × 1080 / 60 Hz,

1280 × 1024 / 60 Hz,

1280 × 720 / 60Hz, 1024 × 768 / 60 Hz