Makita AN942 Technical Information - Page 6
Browse online or download pdf Technical Information for Power Tool Makita AN942. Makita AN942 7 pages. Pneumatic construction nailer
Also for Makita AN942: Instruction Manual (20 pages), Parts Breakdown (3 pages), Instruction Manual (17 pages)
Print Page
R
epair
< 7 > Repair to stop the leaking air.
If the air leaks out from the portion shown in Fig. 11, when you connect the product with an air compressor, check or
replace the joint portion and sealing material ( O rings, gaskets etc.).
A) Leaking from the exhaust
Check or replace the following parts.
See Fig. 12
* Valve seat
* O ring 40
O ring 40
Valve seat
C) Leaking from the trigger section
Check or replace the following parts.
See Fig. 14
* O ring 3
* O ring 8
E
Fig. 12
* O ring 12
* O ring 18
O ring 18
O ring 8
O ring 12
Fig. 14
O ring 3
B
A
C
D
Fig. 11
B) Leaking from the joint of housing and top cap
Check or replace the following parts.
See Fig. 13
* Top cap gasket
* Hex socket head bolt M6x25
Hex socket
head bolts M6x25
(Fasten it firmly
if it is loose.)
D) Leaking from the joint of inlet cap and housing
Check or replace the following parts.
See Fig. 15
* Inlet cap gasket
* Hex socket head bolt M5x30
Hex socket
head bolts M5x30
(Fasten it firmly
if it is loose.)
P 6 / 7
Top cap
gasket
Fig. 13
Inlet cap gasket
Fig. 15