Makita AT638A Instruction Manual - Page 2
Browse online or download pdf Instruction Manual for Power Tool Makita AT638A. Makita AT638A 13 pages. Narrow crown stapler
Also for Makita AT638A: Instruction Manual And Users Manual (13 pages)
Print Page
SPECIFICATIONS
Model:
Air pressure
Staple length
Staple capacity
Minimum hose diameter
Pneumatic tool oil
Dimensions (L x W x H)
Net weight
•
Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
•
Specifications may differ from country to country.
•
Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Wear safety glasses.
Do not use on scaffoldings, ladders.
Intended use
The tool is intended for fastening on interior work and
furniture work.
SAFETY WARNINGS
Pneumatic nailer/stapler safety
warnings
WARNING:
WARNING Read all safety warn-
ings and all instructions. Failure to follow the
warnings and instructions may result in serious injury,
electric shock and/or fire.
Save all warnings and instruc-
tions for future reference.
For personal safety and proper operation and mainte-
nance of the tool, read this instruction manual before
using the tool.
General safety
1.
Do not permit those uninstructed to use the tool.
2.
No horseplay. Respect the tool as a working
implement.
Do not operate when under the influence of
3.
alcohol, drugs or the like.
4.
Never alter the tool.
0.49 - 0.83 MPa (4.9 - 8.3 bar)
ISO VG32 or equivalent
230 mm x 75 mm x 251 mm
Personal protective equipments
1.
Always wear safety glasses to protect your
eyes from dust or fastener injury.
WARNING: It is an employer's responsibility
to enforce the use of safety eye protection
equipment by the tool operators and by other
persons in the immediate working area.
For Australia and New Zealand only
Always wear safety glasses and face shield to
protect your eyes from dust or fastener injury.
The safety glasses and the face shield should
conform with the requirements of AS/NZS 1336.
2.
Wear hearing protection to protect your ears
against exhaust noise and head protection.
Also wear light but not loose clothing. Sleeves
should be buttoned or rolled up. No necktie
should be worn.
Work area safety
1.
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2.
Do not operate the tool in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Operating the tool can
create sparks which may ignite the dust or fumes.
3.
Keep children and bystanders away while
operating the tool. Distractions can cause you to
lose control.
4.
Illuminate the work area sufficiently.
5.
There may be local regulations concerning
noise which must be complied with by keeping
noise levels within prescribed limits. In certain
cases, shutters should be used to contain noise.
2 ENGLISH
AT638A
13 mm - 38 mm
100 pcs.
6.5 mm
1.2 kg