Makita BCS550Z Technical Information - Page 6

Browse online or download pdf Technical Information for Power Tool Makita BCS550Z. Makita BCS550Z 13 pages. Cordless metal cutter 136mm (5-3/8")

Print Page

epair

[3] DISASSEMBLY/ASSEMBLY

[3] -2. Safety Cover Complete and Bearing Box Section (cont.)

ASSEMBLING

1) Assemble Bearing box section by doing the reverse of the disassembling steps, and install it on the machine.

(Fig. 8 on page 4)

Note: Before assembling Helical gear 23 to Spindle, make sure that O ring 26 is installed on Bearing box

as illustrated to right in Fig. 12 on page 5.

2) Assemble Safety cover complete to the machine.

Note 1: Be sure to assemble two Spacers to Safety cover complete as illustrated in Fig. 13.

Note 2: Do not forget to assemble Thickness ring to Bearing box. (Fig. 14)

Note 3: When linking Safety cover complete to Blade case with Tension spring 3, hook each end of Tension spring 3

as illustrated in Fig. 15.

Fig. 13

Safety cover complete

Spacer

Fig. 15

Hook this end of Tension spring 3 through

the hole in Blade case from Blade side.

Hook this end of Tension spring 3 through the hole

in Safety cover complete from gear housing side.

Spacers assembled correctly

to Safety cover complete

Blade side

Fig. 14

Bearing box section

Thickness ring

Apply machine oil to the outer surface of

Thickness ring for smooth movement of

Safety cover complete.

Blade case

Tension spring 3

Safety cover complete

P 6 /13

Gear housing side