James Loudspeakers CDI2|300 Manual

Browse online or download pdf Manual for Amplifier James Loudspeakers CDI2|300. James Loudspeakers CDI2|300 2 pages. Preset guide

Print Page

CDI2|300 / CDI2|600 / CDI2|1200

Every CDi amp is preprogrammed with presets that will cover most James Loudspeaker installations. The CDi should power up with the preset needed

with your order.

Preset #

(Display Name)

Preset 1: (DSP OFF)

Preset 2: (STE FR) — Stereo Fullrange

Preset 3: (MN BI 60HZ) — Mono bi-amp 60Hz

Preset 4: (MN BI 80HZ) — Mono bi-amp 80Hz

Preset 5: (MN BI 100HZ) — Mono bi-amp 100Hz

Preset 6: (SATS 60HZ) — Stereo Sats 60Hz (Additional Sub Amp Required)

Preset 7: (SATS 80HZ) — Stereo Sats 80Hz (Additional Sub Amp Required)

Preset 8: (SATS 100HZ) — Stereo Sats 100Hz (Additional Sub Amp Required)

Preset 9: (SUBS 60HZ) — Stereo Subs 60Hz (Additional Sat Amp Required)

Preset 10: (SUBS 80HZ) — Stereo Subs 80Hz (Additional Sat Amp Required)

Preset 11: (SUBS 100HZ) — Stereo Subs 100Hz (Additional Sat Amp Required)

Preset 12: (109AT70) — System Fullrange

Preset 13: (129AT70) — Stereo Sats 80Hz

Preset 14: (159AT70) — Stereo Sats 80Hz

Preset 15: James Loudspeaker Custom Order Preset

DSP Presets and Processes

Figure 1.1 shows the LCD screen and the two Menu

navigation buttons: MENU, and Encoder.These controls

let you step through the menu items,displayed on the

screen, and select the user presets.

USER PRESETS can be configured with custom settings through the LCD screen. When the amplifier is powered off and back on,

the settings will be as they were when you shut off the amplifier. However, If you recall a user preset, all custom settings will be

lost - unless the presets were saved using the System Architect software ( a free download from www.harmanpro.com). Custom

settings cannot be saved by the front panel display, only by using the System Architect software.

The ICONS in the display illuminate to show which DSP functions are currently in use for each preset.

Figure 1.1

PRESET GUIDE

Preset Menu Tree

HOME

Home Screen

Press MENU Button

Con gure

Select from list

using ENCODER*

CONFIGURE AMPLIFIER MENU

Guided Setup

Amp Wiring

(Y, Bridge)

Input Source

Output Mode

Amp Wiring

(70V / 100V)

(Y, Bridge)

Speaker Tunings /

Output Fader

Save Preset

Load Preset

*Turn then press the ENCODER to make selections.

Figure 1.2

Amplif ier

DSP

Linking

+1. 775. 4 61. 75 0 0