ALIBI ALI-CD1080E Quick Installation Manual
Browse online or download pdf Quick Installation Manual for IP Camera ALIBI ALI-CD1080E. ALIBI ALI-CD1080E 4 pages.
Print PageALI-CD1080E HD-TVI Outdoor
Infrared Turret Camera
Quick Installation Guide
The ALIBI ALI-CD1080E camera feature a 1/2.7" CMOS image sensor that delivers high-definition video
resolution over RG59 coax or any standard analog CCTV cabling up to 1600 ft. This camera must connect
to an HD-TVI compatible DVR, such as an ALIBI HD-TVY hybrid digital video recorder (HVR). This HD video
camera is ideal for security applications that require a high level of detail, such as facial recognition.
Features
CMOS image sensor
•
HD-TVI technology produces 1920 × 1080 (1080p)
•
3.6 mm wide angle (90°) lens captures images over large areas
HD-TVI technology transmits zero latency HD video resolution over coax cabling
•
Up the Cable (UTC) On Screen Display (OSD) configuration setup and control through HD-TVI DVR
•
Built-in IR with range up to 65' in the dark
•
True day/night (ICR) captures sharp, clear images in low light and at night
•
14 °F ~ 122 °F temperature operating range
•
Cable
channel
Mounting
base
Base bezel
Enclosure
Camera
module
Hole for
mounting
screw (3)
www.observint.com
1
Mounting base
What's in the box
Camera assembly
•
Mounting hardware
•
This instruction guide
•
Drill template
•
Tools you need
To install the camera, you will need:
12 Vdc power source. See Specifications for wattage requirement.
•
Tools and additional fasteners (may be required) for mounting the camera
•
Video and power extension cable
•
Installation
Before installation:
Make sure that the device is in good condition and all the assembly parts are included.
•
Check the specification of the products for the installation environment.
•
Make sure that the wall or the ceiling is strong enough to withstand 3 times the weight of the camera.
•
To avoid fire or shock hazard, use only UL listed power supplies. Verify that the power supply will
•
provide the rated voltage and wattage for the camera. See the Specifications section.
IR LED
During installation:
Camera Lens: Handle the camera carefully to prevent scratching or soiling the lens. If the lens or IR
•
array shield becomes soiled, clean it only with approved products. See the
Lens
Power supply: Camera drop cable: The camera drop cable includes two connectors:
•
Video BNC connector: For transmission of the HD-TVI video signal across a coax (75 Ω)
—
extension cable.
Power connector: When applying Vdc power, observe the power polarity. See the drop cab.e
—
photo above for the connector polarity configuration.
Step 1.
Mounting the camera
These cameras can be mounted on a wall or ceiling that has sufficient strength to support it. The video/
power drop cable from the camera can be routed either through mounting surface or through a cable guide
on the edge of the mounting base.
1.
Unscrew the bezel from the mounting base, and then lift it off of the camera.
HD-TVI video
BNC connector
Camera drop cable connectors
Cleaning
Power
Connector
section.
ALI-CD1080E_CQ
5/12/15