Makita BHS630 Instruction Manual - Page 6

Browse online or download pdf Instruction Manual for Power Tool Makita BHS630. Makita BHS630 13 pages.
Also for Makita BHS630: Technical Information (16 pages)

Print Page

Fig. 1

000147

Fig. 2

000150

20. Before setting the tool down after completing

a cut, be sure that the lower guard has closed

and the blade has come to a complete stop.

21. Never attempt to saw with the circular saw

held upside down in a vise. This is extremely

dangerous and can lead to serious accidents.

000029

22. Some material contains chemicals which may

be toxic. Take caution to prevent dust

inhalation and skin contact. Follow material

supplier safety data.

23. Do not stop the blades by lateral pressure on

the saw blade.

24. Always use blades recommended in this

manual. Do not use any abrasive wheels.

25. Keep blade sharp and clean. Gum and wood

pitch hardened on blades slows saw and

increases potential for kickback. Keep blade clean

by first removing it from tool, then cleaning it with

gum and pitch remover, hot water or kerosene.

Never use gasoline.

26. Wear a dust mask and hearing protection

when use the tool.

SAVE THESE INSTRUCTIONS.

WARNING:

DO NOT let comfort or familiarity with product

(gained from repeated use) replace strict adherence

to safety rules for the subject product. MISUSE or

failure to follow the safety rules stated in this

instruction manual may cause serious personal

injury.

IMPORTANT SAFETY

INSTRUCTIONS

FOR BATTERY CARTRIDGE

Before using battery cartridge, read all

instructions and cautionary markings on (1)

battery charger, (2) battery, and (3) product

using battery.

Do not disassemble battery cartridge.

If operating time has become excessively

shorter, stop operating immediately. It may

result in a risk of overheating, possible burns

and even an explosion.

If electrolyte gets into your eyes, rinse them

out with clear water and seek medical

attention right away. It may result in loss of

your eyesight.

Do not short the battery cartridge:

(1)

Do not touch the terminals with any

conductive material.

(2)

Avoid storing battery cartridge in a

container with other metal objects such as

nails, coins, etc.

(3)

Do not expose battery cartridge to water

or rain.

A battery short can cause a large current flow,

overheating, possible burns and even a

breakdown.

Do not store the tool and battery cartridge in

locations where the temperature may reach or

exceed 50 ﾟ C (122 ﾟ F).

Do not incinerate the battery cartridge even if it

is severely damaged or is completely worn out.

The battery cartridge can explode in a fire.

ENC007-7