Makita BJS101RFE Technical Information - Page 4

Browse online or download pdf Technical Information for Power Tool Makita BJS101RFE. Makita BJS101RFE 9 pages. Cordless metal shears 1.0mm (20ga)

Print Page

epair

[3] DISASSEMBLY/ASSEMBLY

[3]-1. Center blade (cont.)

ASSEMBLING

2) Mount the assembled Shearing mechanism on Crank housing complete as illustrated in Figs. 7, 8.

Then assemble Crank housing complete to Gear housing complete. (Refer to Fig. 2.)

Fig. 7

Crank housing

complete

Fitting Dust cover in this rectangular depression,

assemble Shearing mechanism to Crank housing

complete.

Fig. 8

Insert Thin washer 7 and Teflon washer 7

into the space between Center blade and

Crank housing complete as illustrated below;

one set each into the both sides of Center blade.

Be sure to place Thin washer 7 on the blade side.

[3]-2. Side blades R and L

DISASSEMBLING

Side blade section can be disassembled

as described in Fig. 9.

ASSEMBLING

Do the reverse of the disassembling steps.

Note: Be sure to assemble Spacer between

Slip plate L and Side blade L

as illustrated in Fig.9.

Thin washer 7

Teflon washer 7

Center blade

Crank housing

complete

Fig. 9

Side blades R and L can be removed by removing

M5x10 Hex Socket countersunk screw.

Side blade R

Slip plate R

Shearing mechanism

Make sure that Dust cover

is assembled to Center blade

as described in Fig. 5.

Dust cover

Center blade

Insert Pin 7 through

Crank housing complete

from Side blade R side.

Side blade R

Pin 7

Stop ring E-6

M5x10 Hex socket

countersunk screw

Side blade L

Spacer

Slip plate L

P 4/ 9

Secure Pin 7 with

Stop ring E-4.

Stop ring E-4

Pin 7

Spacer is assembled

between Side blade L

and Slip plate L.