Makita BJV180 Instruction Manual - Page 11
Browse online or download pdf Instruction Manual for Power Tool Makita BJV180. Makita BJV180 13 pages. Cordless jig saw
Also for Makita BJV180: Parts Breakdown (3 pages), Specification Sheet (2 pages), Instruction Manual (13 pages), Instruction Manual (13 pages), Technical Information (13 pages), Instruction Manual (18 pages)
Print Page
CAUTION:
Always use blades No. B-8, B-13, B-16, B-17 or 58
•
when using the guide rail and the guide rail
adapter.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the
•
battery cartridge is removed before attempting to
perform inspection or maintenance.
Replacing carbon brushes
001145
Remove and check the carbon brushes regularly.
Replace when they wear down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders.
Both carbon brushes should be replaced at the same
time. Use only identical carbon brushes.
Use a screwdriver to remove the brush holder caps.
Take out the worn carbon brushes, insert the new ones
and secure the brush holder caps.
1
007505
To maintain product SAFETY and RELIABILITY, repairs,
any other maintenance or adjustment should be
performed by Makita Authorized Service Centers,
always using Makita replacement parts.
1. Limit mark
1
1. Brush holder
cap
2. Screwdriver
2
ACCESSORIES
CAUTION:
These
accessories
•
recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to
persons.
attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
Jig saw blades
•
Hex wrench 4
•
Rip fence (guide rule) set
•
Guide rail adapter set
•
Guide rail set
•
Anti-splintering device
•
Cover plate
•
Dust nozzle
•
Various type of Makita genuine batteries and
•
chargers
11
or
attachments
Only use
accessory or
are