Gardebruk RX 105 Operating Instructions Manual - Page 7
Browse online or download pdf Operating Instructions Manual for Pressure Washer Gardebruk RX 105. Gardebruk RX 105 12 pages.
Print Page
Switching On
Unwind the high pressure hose (2) complete-
ly. Hold on to the transport handle (1) during
this procedure.
•
• Aim trigger gun (8) towards the ground.
• Release the trigger lock (16) on the trigger
gun (8) and fully depress the trigger (17).
Switching Off
• Let go of the trigger (17) and lock it in
• During longer breaks you should switch off
the high-pressure cleaner by turning the
Foam nozzle
Your high-pressure cleaner is equipped with a
foam nozzle. If required, detergent can be
• Disconnect the high-pressure cleaner from
(12).
• Insert the foam nozzle (12) into the spray
lance as described above. Please observe the
wards
with detergent observing the maker´s instruc-
the trigger (17) of the spray-gun.
• Spray detergent onto the dry surface and let
it react, but not dry-out, for some minutes.
• Remove the foam-nozzle (12) from the
spray-gun, fasten the fan-nozzle (10), as
discribed above and clean the object with the
jet-stream
Cleaning with your high-pressure cleaner
•If
necessary, first clean the object from
coarse soil in high-pressure mode.
•
Spray the detergent onto the surface and
allow it to soak in. Do not leave it to dry.
•
Spray off the loosened soil in high-pressure
mode.
Fan Nozzle
be adjusted between jet (21) and spray (22)
via the fan nozzle.
Rotor Nozzle
water. This can be used to achieve rapid
cleaning of large areas of the ground or walls.
•
heading "Before Using Equipment".
• Mount the rotor nozzle (12) onto the spray
lance (9) as described earlier.
•
jet is produced.
•
algae and moss, for example, can be removed
from exterior surfaces.
Large-Surface Cleaner
The large-surface cleaner (15) facilitates the
high-pressure nozzles in the cleaning head are
rotated by the water pressure. The casing and
the surrounding cleaning brushes create
-
virtually no splashing.
• Place the surface cleaner coupling (15) onto
place. According to the requirements the
extension (14) can be mounted between gun
and spray lance.
• First place the large-surface cleaner on the
surface to be cleaned and switch on the
high-pressure cleaner as described above.
Without using excessive pressure, move the
large-surface cleaner across the surfaces to be
cleaned.
WARNING:
•
Never squeeze the trigger of
the trigger gun unless the large surface
cleaned.
•
thoroughly cleared of algae, moss and similar
www.Deuba24online.de
Finishing the Cleaning Process
• Switch off high-pressure cleaner by turning
nect the mains plug.
• Turn off the water supply and disconnect the
equipment from the water supply.
•
ment is depressurised.
• Lock the gun trigger (17) with the trigger
lock (16).
• Disconnect the high-pressure hose from the
and remove the tube from the gun by pulling
downwards.
• Wind the whole of the high-pressure.
•
frost-free and out of the reach of children.
• Before longer periods of disuse and storage
during the winter, allow to run for about 5
seconds without any water supply and with
the high pressure hose disconnected. By doing
the remaining water as possible, which will
virtually remove the risk of damage due to
water freezing inside the equipment.
Care and Service
• Before any cleaning or servicing of the
high-pressure cleaner, the mains plug should
be disconnected.
• Only clean the casing with a dry cloth and do
not use any cleaning agents, as these may
damage the casing.
• Remove the dirt filter from the water inlet
(7), clean it under running water and re-insert
it into the inlet.
• The cleaning needle provided (13) serves to
high-pressure cleaner, insert the cleaning
needle (13) into the nozzle from the front to
dislodge any foreign objects from the nozzle.
12
13
www.Deuba24online.de
Guarantee
•This product carries a full 1-year guarantee.
-
The period of guarantee begins on the day of
purchase. The date of purchase can be
verified by sending us the original receipt.
During the guarantee period we guarantee:
-
• Free repair of any defects.
• Free replacement of all parts that become
damaged.
• Inclusive, free, professional service (i.e. free