Makita DCO180 Instruction Manual - Page 2
Browse online or download pdf Instruction Manual for Power Tool Makita DCO180. Makita DCO180 13 pages. Cordless cut-out tool
Also for Makita DCO180: Instruction Manual (13 pages), Technical Information (8 pages)
Print Page
ENGLISH (Original instructions)
SPECIFICATIONS
Collet chuck capacity
Rated speed (n)/ No load speed (n
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Cd
Only for EU countries
Ni-MH
Do not dispose of electric equipment or
Li-ion
battery pack together with household
waste material!
In
observance
Directives, on Waste Electric and
Electronic Equipment and Batteries and
Accumulators and Waste Batteries and
Accumulators and their implementation
in accordance with national laws,
electric equipment and batteries and
battery pack(s) that have reached the
end of their life must be collected
separately
environmentally compatible recycling
facility.
Intended use
The tool is intended for cutting gypsum, wood, plastic
and soft wall tiles.
Noise
The
typical
A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A).
Wear ear protection
Vibration
The
vibration
total
determined according to EN60745:
Model
)
0
Overall length
Net weight
Rated voltage
of
the
and
returned
noise
level
determined
) : 77 dB (A)
pA
value
(tri-axial
vector
3 mm, 6 mm or 1/8", 1/4"
30,000 min
D.C. 14.4 V
END004-6
Work mode : rotation without load
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
European
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
to
an
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENE012-1
For European countries only
EC Declaration of Conformity
ENG905-1
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Cut-Out Tool
Model No./ Type: DCO140, DCO180
Conforms to the following European Directives:
2006/42/EC
They are manufactured in accordance with the following
Standard or standardized documents:
EN60745
The Technical file in accordance with 2006/42/EC is
ENG900-1
available from:
sum)
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
2
DCO140
3 mm, 6 mm or 1/8", 1/4"
-1
313 mm
1.6 kg
) : 2.5 m/s
h
2
DCO180
-1
30,000 min
313 mm
1.7 kg
D.C. 18 V
2
or less
ENG901-1
ENH101-17