Makita DCS553 Instruction Manual - Page 13
Browse online or download pdf Instruction Manual for Power Tool Makita DCS553. Makita DCS553 17 pages. Cordless metal cutter
Print Page
► 1 . Hole for lanyard (tether strap)
MAINTENANCE
CAUTION:
Always be sure that the tool is switched
off and the battery cartridge is removed before attempt-
ing to perform inspection or maintenance.
CAUTION:
Clean out the upper and lower guards
to ensure there is no accumulated metal chips which
may impede the operation of the lower guarding sys-
tem. A dirty guarding system may limit the proper opera-
tion which could result in serious personal injury. When
using compressed air to blow metal chips out of the
guards, wear a proper eye and breathing protection.
CAUTION:
After each use, clean up the inside
of the dust box and wipe off the saw dust on the
tool. Fine metallic dust may come inside the tool and
cause malfunction or a fire.
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
To maintain product SAFETY and RELIABILITY,
repairs, any other maintenance or adjustment should
be performed by Makita Authorized or Factory Service
Centers, always using Makita replacement parts.
Inspecting the circular saw blade
Check the circular saw blade carefully for
•
cracks or damage before and after each use.
Replace a cracked or damaged circular saw
blade immediately.
Replace with a new circular saw blade as soon
•
as it no longer cuts effectively. Continuing to
use a dull circular saw blade may cause a danger-
ous kickback and/or motor overload.
•
Circular saw blades for metal cutter cannot be
re-sharpened.
OPTIONAL
1
ACCESSORIES
CAUTION:
are recommended for use with your Makita tool
specified in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
•
Carbide-tipped circular saw blades
•
Rip fence (Guide rule)
•
Clamping screw
•
Hook
•
Hex wrench
•
Safety goggles
•
Makita genuine battery and charger
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
13 ENGLISH
These accessories or attachments