Avanti BCA5448 Instruction Manual - Page 10

Browse online or download pdf Instruction Manual for Kitchen Appliances Avanti BCA5448. Avanti BCA5448 20 pages. Beverage cooler

Print Page

 STORAGE

Many cans may differ in size and dimensions. As such the actual number of cans you may be able to

store may vary.

 INTERIOR LIGHT

If you would like the light ON press the

The light will automatically turn OFF after 10 minutes.

 SHELVES



To prevent damaging the door gasket, make sure to have the door all the way opened when

pulling the bottom shelf out of the rail compartment.



For easy access to the storage content, you must pull the shelf approximately 1/2 out of the rail

compartment, however this unit was designed with a plastic post on each sides of the shelf track

to prevent bottles from falling.



When removing the shelf out of the inner rail, make sure to remove all items first. Then move the

shelf to the position where the notch of shelf is exactly under the plastic post and lift the shelf. In

order to replace the shelf, repeat steps described above in reverse.

 INSTALLING STAINLESS STEEL HANDLE

This wine chiller includes a stainless steel handle that is not required to operate this unit. To install the

handle please follow the below instructions:

1. Pull away the door gasket in the area where the handle is to be installed as shown below in

Illustration # 1. The gasket is easily displaced by hand, no tools are necessary.

2. Align the handle with the screws pre-installed on the backside of the door. Tighten the

screws using a Phillips head screwdriver until the handle sets both flush and secured tightly

against the door frame. (DO NOT overtighten as this will cause damage to the handle

assembly).

3. Replace the door gasket to its original position.

1 Gasket

button and the interior light will be turned ON.

2 Screw

3 Screwdriver

4 S/S Handle