Garden Gear M1E-LD-115 Instruction Manual - Page 6
Browse online or download pdf Instruction Manual for Power Tool Garden Gear M1E-LD-115. Garden Gear M1E-LD-115 18 pages. Hedge and edge trimming shears
Print Page
Remove any adjusting key or wrench before turning the power tool on. A
•
wrench or a key left attached to a rotating part of the power tool may
result in personal injury.
To maintain full control of the tool, keep a proper footing at all times with
•
your weight evenly balanced over both feet and never overreach.
To maintain full control of the tool, keep the handle dry, clean and free
•
from oil and grease.
Power tool use and care
Do not force the power tool to do jobs for which it was not intended. The
•
correct power tool will do the job better and safer at the rate for which it
was designed.
Do not use the power tool if the power switch is faulty. Any power tool that
•
cannot be controlled with the switch is dangerous and must be repaired.
To prevent the risk of accidentally starting the tool, make sure the tool is
•
disconnected from the mains power supply before making any
adjustments, changing accessories, or storing the tool.
Power tools are dangerous in the hands of untrained users. When not in
•
use store the tool out of the reach of children, and do not allow persons
unfamiliar with the tool (or these instructions) to operate it.
To prevent the risk of accidents, periodically check the tool for
•
misalignment, binding of moving parts, breakage of parts and any other
condition that may affect the operation of the power tool. If the tool is
damaged in any way, take it to your local hardware store for repair.
Keep cutting tools clean and sharp. Properly maintained cutting tools with
•
sharp cutting edges are less likely to bind and are easier to control.
Use the power tool and accessories in accordance with these instructions,
•
taking into account the working conditions, and the work to be performed.
Use of the power tool for jobs for which it was not intended could result in
injury.
To ensure that the power tool is safe, have it serviced at your local
•
hardware store using only identical replacement parts.
Special safety warning for this product
Only use this tool in daylight, or good artificial light.
•
When in use, keep all parts of your body away from the cutting blade. Do
•
not remove cut material or hold material to be cut when the blades are
moving.
Make sure the power switch is off when clearing jammed material. A
•
moment of inattention while operating the machine can result in serious
personal injury.
Carry the tool by the handle with the cutter blade stopped. When
•
transporting or storing the tool, always fit the blade protector. Proper
handling of the machine will reduce possible personal injury from the
blades.
Only switch the motor on when your hands and feet are away from the
•
cutting blades.
6