AVANTO 177IC1800P User Manual - Page 5

Browse online or download pdf User Manual for Ranges AVANTO 177IC1800P. AVANTO 177IC1800P 11 pages. 1800 watt countertop induction range with probe cooking

User Manual

Installation Instructions

Installation must conform to all applicable codes. Improper installation will void the manufacturer's warranty.
Do not obstruct or reduce the airflow of the ventilation openings on the sides, bottom, or the rear of the unit.
Blocking airflow could cause the unit to overheat.
Do not install near any combustible surfaces. There must be a minimum of 4" between the induction range and
any non-combustible surface to allow sufficient airflow around the unit. There must be at least ¾" between the
bottom of the induction range and the surface. Avoid placing on soft surfaces that could restrict the airflow to the
bottom of the unit. There must be at least 12" of clearance on the sides and back from combustible surfaces.
Do not operate this product in high heat environments. Avoid placing this product near gas equipment. The
maximum ambient room temperature must not exceed 100°F. Temperatures are measured in ambient air while
all appliances in the kitchen are in operation.
The power supply must comply with the rated voltage, frequency, and plug specified on the data plate and must
be grounded. Do not use an extension cord with plug and cord models.
This product conforms to UL-197 standards and requires it to be under an exhaust hood. A vertical distance
of not less than 48" shall be provided between the top of the appliance and filters or any other combustible
material. Exhaust installation must conform to applicable codes. The ranges are designed to operate only for the
voltages indicated on the serial plate.
As a precaution, persons using a pacemaker should stand back 12" from an operating unit. Studies have shown
that the induction element will not disrupt a pacemaker. Keep all credit cards, driver's licenses, and other items
with a magnetic strip away from an operating unit. The unit's magnetic field might damage the information on
these strips.
www.AvantcoEquipment.com
5