HIKVISION HiWatch Series Quick Start Manual - Page 12
Browse online or download pdf Quick Start Manual for DVR HIKVISION HiWatch Series. HIKVISION HiWatch Series 15 pages. Hd turret and bullet camera
Also for HIKVISION HiWatch Series: Quick Start Manual (20 pages), Quick Start Manual (18 pages), How-To (4 pages), User Manual (15 pages), User Manual (15 pages)
Print Page
Network Settings
Configure General Settings
You shall properly configure the network settings before you operate DVR over network.
Go to Menu > Configuration > Network > General.
Set the network general parameters.
Click Apply to save the settings.
Configure Hik-Connect
Hik-Connect provides mobile phone application and platform service to access and manage your connected devices, which enables
you to get a convenient remote access to the surveillance system.
Go to System > Configuration > Network > Platform Access.
Check Enable to activate the function. Then the service terms will pop up.
Hik-Connect is disabled by default.
The verification code is empty by default. It must contain 6 to 12 letters or numbers, and it is case sensitive.
(Optional) Check Custom to enter the server address as your desire.
(Optional) Check Enable Stream Encryption, verification code is required for remote access and live view.
Click Apply.
What to do next:
After configuration, you can access and manage your devices through Hik-Connect app or website.
Live View and Record Settings
Live view shows you the video image getting from each camera in real time. The DVR will automatically enter Live View mode when
powered on. In the live view mode, there are icons at the right top of the screen to indicate the status of record and alarm for each
channel. You can click
Live View Icons
In the live view mode, there are icons on the screen to indicate the record and alarm status of each channel.
Item
Description
Alarm (video loss, tampering, motion detection,
VCA or sensor alarm)
Record (manual record, continuous record,
motion detection, VCA or alarm triggered record)
Playback
The recorded video files and pictures on HDD can be played back. Refer to the user manual for details of each playback mode.
Go to Menu > Playback.
Check the channel(s) in the channel list for playback.
Double click a date on the calendar.
(Optional) Use the toolbar in the bottom to control the playing progress.
Digital Video Recorder Quick Start Guide
at the toolbar to start recording.
Network Settings
Description of Live View Icons
Item
11
Description
Alarm and Record
Event/Exception (event and exception
information, appears at the lower-left corner
of the screen)