Avantree AH6B User Manual - Page 5

Browse online or download pdf User Manual for Headphone Avantree AH6B. Avantree AH6B 6 pages. Stereo wireless headphones

Print Page

Using as a wired headphone

Use the supplied 3.5mm audio cable to connect to a non-Bluetooth audio device, or if the headphone battery is

depleted.

Note: The headphone will power off automatically once you plug in the 3.5mm audio cable .

When the LED flashes RED 3 times per 10 seconds or you hear the voice prompts "Low battery please turn off

and charge", you should fully recharge the device for about 2 hours. Charged with the micro USB cable - The LED

indicator on the headphones will remain

RED

while charging and turn off when charging is complete.

Clear pairing history

If you have issues with the audio stream skipping or cutting out when using Avantree AH6B, please try to clear

pairing history as following:

Firstly, turn on the headset (Non-calling Status), then Press and Hold BOTH

5 seconds till the LED blinks PINK for 2 seconds, then the headphones enter into PAIRING MODE automatically.

No sound with PC?

• Set Avantree AH6B as the default device or output device on the PC.

• When using AH6B to make VOIP calls through apps, please set "AH6B

Hands-Free" as Microphone and Speakers device.