Empire DVLXG55S Homeowner's Manual - Page 5

Browse online or download pdf Homeowner's Manual for Indoor Fireplace Empire DVLXG55S. Empire DVLXG55S 14 pages. Direct vent zero clearance gas fireplace heater

Print Page
MULTIFUNCTION REMOTE OPERATING INSTRUCTIONS
The remote control can operate as a room thermostat. The thermostat can be set to a desired
temperature to control the comfort level in a room. To activate this function, press the Thermostat
Button. The LCD display on the transmit ter will change to show that the room thermostat is "ON"
and the set temperature is now displayed. To adjust the set temperature, press the Up or Down
Arrow Buttons until the desired set temperature is displayed on the LCD screen of the Transmitter,
as shown below.
Room Temperature
This function will lock the Buttons to avoid unsupervised operation. To activate this function, press
the MODE and UP Buttons at the same time.
To deactivate this function, press the MODE and UP Buttons at the same time.
Set Temperature
The life span of the remote control batteries depends on various factors: quality of the batteries used,
the number of ignitions of the appliance, the number of changes to the room thermostat set point,
etc.
When the transmitter batteries are low, an Icon will appear on the LCD display of the transmitter
before all battery power is lost. When the batteries are replaced this Icon will disappear.
Room Temperature
ROOM THERMOSTAT
Room Temperature
Set Temperature
Set Temperature

BUTTON LOCK

LOW BATTERY POWER DETECTION

5