HIKVISION TURBO HD Series User Manual - Page 2
Browse online or download pdf User Manual for DVR HIKVISION TURBO HD Series. HIKVISION TURBO HD Series 2 pages. Tvi dome camera
Print Page
2.1 Installation of Type Camera
I
Steps:
1.
Pry the snap joint up to remove the bubble
and the black liner.
Snap Joint
Figure 2-1 Remove the Bubble
2.Drill the screw holes and cable hole according to
the drill template.
Cable Hole
Screw Hole
Figure 2-2 The Drill Template
3.Align the base plate with the mounting template
and secure it with supplied self-tapping screws.
Base Plate
4. Route the cables through the cable hole.
5. Connect the corresponding cables.
6. Adjust the camera according to the figure below
to get an optimum angle.
°
°
0 ~350
P Direction
°
°
0 ~70
°
°
0 ~350
T Direction
R Direction
Figure 2-4 3-axis Adjustment
7. Push the black liner and bubble toward the
camera and buckle them upon to secure them
on the camera.
Figure 2-5 Complete the Installation
Rotate the bubble after completing the
Installation may change the postion of the lens.
2.2 Installation of Type
II
Camera
1.Loosen the screws on the bubble to remove the
bubble and the black liner.
Figure 2-6 Remove the Bubble
2.Drill the screw holes and cable hole on the
ceiling according to the supplied drill template.
1
Drill Template
1
Cable Hole
A
Hole A: for cables routed through the ceiling
screw hole 1: for Mounting Base
Screw Hole
1
Figure 2-7 Drill Template
3.Align the base plate with the mounting template
and secure it with supplied self-tapping screws.
Figure 2-8 Fix the Camera to the Ceiling
4. Route the cables through the cable hole.
5. Connect the corresponding cables.
6. Adjust the camera according to the figure below
to get an optimum angle.
°
°
0 ~355
P Direction
°
°
0 ~75
T Direction
Adjustment
Screw
°
°
0 ~355
R Direction
Figure 2-9 3-axis Adjustment
8. Fit the black liner and bubble on the camera.
Figure 2-10 Complete the Installation