Avatar Technologies RH141 User Manual - Page 6

Browse online or download pdf User Manual for Switch Avatar Technologies RH141. Avatar Technologies RH141 16 pages. 4-port quadview hdmi switch

Print Page

Operation

Various operations are available from this unit, select your preferred operation as follows:
1. Push buttons.
2. Display mode menu.
3. Keyboard.
4. IR remote control.
5. RS-232 control.

1. Parts and push buttons

Front panel
No. Item
LED indicators
1
INPUT
2
Recall
3
SET*
4
5
FULL/PIP/
WINDOWS/PAP/
QUADVIEW
6
Exit/
Lock
7
Menu/
Select
8
(Cursor buttons)
IR receiver
9
10 Pin hole
6
1
2
Description
Indicate the status of display.
Choose the desired source from 1~4, and then press the corresponding button.
For more details, refer to the chapter of Mode descriptions.
Recall the customized setting configured from SET button. Press to light up the
buttons (1~4 ), and then select the desired setting to recall.
Save the customized input and output up to 4 settings.
1. Select a desired mode by pressing PIP/WINDOWS/PAP/QUADVIEW button.
2. Set a preferred input source(1~4 ) .
3. Press SET button, then all the buttons of input(1~4) will be flashed.
4. Press a preferred button(1~4) to save the setting to the memory of unit.
Select the desired mode you wish to display, and the pressed button will be
illuminated.
■ Press to exit the OSD menu.
■ Press to lock all the buttons on the unit, or press it again to unlock
■ Press and hold this button, then turn on the power of switch to restore the
default resolution (1024x768).
■ Press to bring up the OSD menu.
■ Select a desired option on the menu.
■ Press and hold this button, then turn on the power of switch to restore the
system to factory default settings.
Press to navigate the OSD menu.
Receive the signals from bundled remote control.
Use a paperclip to reset this unit if necessary.
3 4
5
6 7
8
9 10