AvaTemp 914DPT450ABR Quick Start Manual - Page 2

Browse online or download pdf Quick Start Manual for Thermometer AvaTemp 914DPT450ABR. AvaTemp 914DPT450ABR 2 pages.

Print Page

BATTERY

(1) LR44 battery included. Use a coin to open and seal the case for battery

replacement.

INSTRUCTIONS

1) Press the ON/OFF button to turn on.

2) Select temperature mode by pressing the °F/°C button.

3) Insert probe at least 0.5" into food for an accurate reading.

4) Press the ON/OFF button to turn off (the thermometer will automatically turn

off after 10 minutes of inactivity).

DATA-HOLD MODE

While the probe is in food, press the HOLD/CAL button to hold the current

temperature reading. H will display in the top right corner. Press the HOLD/CAL

button again to exit the hold mode.

CALIBRATION

1) Insert the probe into a mixture of 3 parts ice and 1 part water.

2) Press the HOLD/CAL button for 4 seconds.

3) Release the HOLD/CAL button when CAL starts flashing on the display.

4) Once 32.0°F/0°C displays, the calibration is complete.

(Note: This function will only work if the temperature is between 30°F and 34°F,

or -1°C and 1°C. If the temperature is outside of this range, ERR will display for

2 seconds, and then return to the temperature mode.)

WARNING

Hand wash only. Not for oven use.

5 YEAR WARRANTY

AvaTemp warrants its products to be free from defects in material and workmanship for a

period of 5 years, unless otherwise stated. This is the sole and exclusive warranty made by

AvaTemp covering your AvaTemp brand product. A claim under this warranty must be made

within 5 years from the date of purchase of the product. Only the product's original purchaser

may make a claim under this warranty. AvaTemp reserves the right to approve or deny the

repair or replacement of any part or repair request. The warranty is not transferable.