Jandy Jandy Pro Series Owner's Manual - Page 10

Browse online or download pdf Owner's Manual for Swimming Pool Filter Jandy Jandy Pro Series. Jandy Jandy Pro Series 20 pages. Single element cartridge pool & spa cs filters
Also for Jandy Jandy Pro Series: Owner's Manual (12 pages), Installation Manual (16 pages), Installation And Operation Manual (20 pages), Manual (8 pages), Quick Start Manual (2 pages), Installation And Operation Manual (20 pages), Installation Instructions (2 pages), Installation And Operation Manual (16 pages), Installation And Operation Manual (16 pages), Installation And Operation Manual (16 pages)

Print Page
Jandy Jandy Pro Series Owner's Manual
Page 10
RISK OF ELECTRICAL SHOCK OR ELECTROCUTION,
which could result in serious injury or death. The Jandy Pro Series
Nicheless LED Lights are only available for 12-volt AC power.
For supply connection, use only an isolating low voltage power
supply with ungrounded output, evaluated and listed by a NRTL for
swimming pool use.
4.3

Wiring to a Switch

The Jandy
Pro Series Nicheless LED Lights can be wired to a switch to
®
manually operate the lights. Refer to Figure 4 to connect the lights into the
switch.
Line
Neutral
Ground
Figure 4.
Wiring Jandy Pro Series Nicheless Underwater Lights
4.4

Twelve (12) Volt Installation

A 12-14 Volt AC Magnetic Transformer must be used to power all 12-Volt
lights.
NOTE For optimum performance Jandy Pro Series recommends not
exceeding the load factor specified by the instructions included with
the transformer.
To ensure maximum safety, use only a Class 2 magnetic transformer that
can supply 12-14 Volts AC to power all 12-Volt lights. The transformer
must be listed or certified by a Nationally Recognized Testing Laboratory
(NRTL) for the intended use.
ENGLISH
WARNING
AquaLink
Relay or Switch
Black
White
GFCI*
Ground
*
If required by transformer manufacturer's instructions
or by local code and AHJ requirements.
Nicheless Underwater LED Lights | Owner's Manual
Aux
®
Black
120 volts to
White
12VAC
Green
Transformer