KitchenAid KEBS245 Installation Instructions Manual - Page 3
Browse online or download pdf Installation Instructions Manual for Oven KitchenAid KEBS245. KitchenAid KEBS245 6 pages. Electric built-in single & double ovens
Print Page
ELECTRICAL
REQUIREMENTS
Electrical
Shock Hazard
- Electrical
ground
is required
on this appliance.
l
Improper
connection
of the equipment-grounding
conductor
line can result in
electrical
shock.
. Check with a qualified
electrician
if you are in doubt as to whether
the appliance
is
properly
grounded.
Do Not modify the power supply
cord plug.
If it will not fit the
outlet,
have a proper outlet installed
by a qualified
electrician.
- Do Not use an extension
cord with this appliance.
Such use may result in a fire,
electrical
shock or other personal
injury.
. Do Not have a fuse in the neutral or ground
circuit.
A fuse in the neutral or ground
circuit
could result in an electrical
shock.
l
This appliance
must be connected
to a grounded,
metallic
permanent
wiring
system;
or a grounding
conductor
should
be connected
to the grounding
terminal
or lead on
the appliance.
Failure to do so could result in an electrical
shock.
I
I
It is the customer's
responsibility
tocontact
a qualified
electrical
installer
to assure
that electrical
installation
is
adequate
and in conformance
with National
Electrical
Code,
ANSliNFPA
70.latest
edition
and local codes
and
ordinances.
A 1201240.volt
or 1201208 volt, 60 Hz, AC only, fused electrical
supply is required.
A time-delay
fuse or circuit breaker
is recommended.
It is recommended
that a separate
circuit serving only this appliance
be provided.
It is the personal
responsibility
of the customer
to have
a properly
grounded,
3-prong
wall
receptacle
installed
by a qualified
electrician.
The following
amperage
circuits
must be provided.
When installed
in a mobile
home, the installation
must conform
to the Manufactured
Home Construction
and Safety
Standards,
Title 24 CFR, Part 3280 (formerly
the Federal
Standard
for Mobile
Home Construction
and Safety, Title
24. HUD, Part 280)
Model
No
KEBS177
KEBI140/141/170/171
TABLE
1
[ -%axlmum
Wattage
(KW)
Fuse or Breaker
240/208
Volt
3.713 0
Size Required
KEBS145/146/176
SCO-1243/1273
SCO-243312733
KEBl240/270
SCO-224312273
I
I
c
3 813 0
I
30 Amps
6 O/5 0
KEBS277
KEBl241/271
KEBS24512461276
X0-2443/2743
7 315 8
40 Amps
/
7 516 0
_~--~~.~~