Jandy Jandy Pro Series Installation And Operation Manual - Page 16

Browse online or download pdf Installation And Operation Manual for Controller Jandy Jandy Pro Series. Jandy Jandy Pro Series 20 pages. Single element cartridge pool & spa cs filters
Also for Jandy Jandy Pro Series: Owner's Manual (12 pages), Installation Manual (16 pages), Owner's Manual (20 pages), Manual (8 pages), Quick Start Manual (2 pages), Installation And Operation Manual (20 pages), Installation Instructions (2 pages), Installation And Operation Manual (16 pages), Installation And Operation Manual (16 pages), Installation And Operation Manual (16 pages)

Print Page
Jandy Jandy Pro Series Installation And Operation Manual
Page 16
ENGLISH
Symptom
Variable-Speed
Incorrect dip switch setting.
Controller LCD
Make sure pump dip switches 1 and 2 are both ON if the controller is the JEP-R and both are OFF if the
is not displaying
controller is a PDA, AquaLink RS, or AquaLink Z4. See "3.2.4.1 Install with AquaLink® controller"
information
or
Improper low-voltage wiring.
pump LEDs are
Check low-voltage wiring between pump and controller. Correct if necessary. See "3.2 Electrical Installation"
not illuminated.
Controller
Improper low-voltage wiring.
displays "Pump
Check low-voltage wiring between pump and controller. Correct if necessary. See "3.2 Electrical Installation"
not connected".
Improper pump address set.
Ensure pump dip switches 3 and 4 are set properly for the installation. Both should be OFF for use with
Variable-Speed Controller or set to the proper address when connected to an AquaLink RS, AquaLink PDA,
or an AquaLink Z4. See "3.2.4.1 Install with AquaLink® controller"
Fault message
Fault condition exists.
appears on
View fault message on controller and correct fault before proceeding. If unsure how to correct fault, contact
controller display.
Zodiac Technical Support at 800.822.7933.
Jandy
Pro Series VS PlusHP Pumps
®
Possible Cause/Solution
|
Installation & Operation Manual