Lexmark C543dn Quick Reference - Page 2

Browse online or download pdf Quick Reference for Printer Lexmark C543dn. Lexmark C543dn 4 pages. Color laser printer
Also for Lexmark C543dn: Specifications (6 pages), Specification (6 pages), Specifications (6 pages), Specifications (6 pages), Specifications (6 pages), Datasheet (6 pages), Product Specifications (6 pages), Specifications (6 pages), Quick Manual (4 pages), Manual (15 pages)

Print Page
Lexmark C543dn Quick Reference
Loading the 650-sheet duo drawer
The 650-sheet duo drawer (Tray 2) consists of a 550-sheet tray and an
integrated 100-sheet multipurpose feeder. The drawer is loaded in
the same way as the 250-sheet tray and the optional 550-sheet tray,
and supports the same paper types and sizes. The only differences
are the look of the guide tabs and the location of the paper size
indicators, as shown in the following illustration:
Note: The optional 550-sheet tray is not available for all printer
models.
1
Length guide tabs
2
Size indicators
3
Width guide tabs

Using the multipurpose feeder

1
Push the feeder release latch to the left to allow the multipurpose
feeder to fall open.
2
Grasp the extension, and pull it straight out until it is fully
extended.
3
Prepare the paper for loading.
Flex sheets of paper back and forth to loosen them, and then
•
fan them. Do not fold or crease the paper. Straighten the edges
on a level surface.
Hold transparencies by the edges and fan them. Straighten
•
the edges on a level surface.
2
Note: Avoid touching the print side of transparencies. Be
careful not to scratch them.
Flex a stack of envelopes back and forth to loosen them, and
•
then fan them. Straighten the edges on a level surface.
4
Locate the stack height limiter and tab.
Note: Do not exceed the maximum stack height by forcing paper
under the stack height limiter.
1
Tab
2
Stack height limiter
3
Width guides
4
Size indicators
5
Squeeze the left width guide tab, and align it for the size of paper
being loaded.
6
Load the paper, and then adjust the width guide to lightly touch
the edge of the paper stack.
Load paper, card stock, and transparencies with the
•
recommended print side facedown and the top edge entering
first.