Avaya 5600 Series Installation Job Aid

Browse online or download pdf Installation Job Aid for IP Phone Avaya 5600 Series. Avaya 5600 Series 14 pages. Gigabit, ip phones
Also for Avaya 5600 Series: Installation And Safety Instructions (11 pages), Configuration Manual (17 pages), Quick Install Manual (2 pages), Product Information (2 pages)

Print Page

Installation Job Aid (English) for Avaya

Ethernet Routing Switch 5600 Series

(NN47200-304, ver 01.01)

Before you begin

Ensure the area where you install and use the Avaya ERS 5600 Series switch meets the

following environmental requirements:

• Ambient temperature between 32° and 106° F (0° and 50° C)

• Relative humidity between 10% and 90% noncondensing

• No nearby heat sources such as hot air vents or direct sunlight

• No nearby sources of severe electromagnetic noise

• No excessive dust

• Adequate power source within six feet; one circuit required for each power supply (see

table, AC and DC power specifications)

• At least 2 inches (5.08 cm) on each side of the switch unit for ventilation

• Adequate space at the front and rear of the switch for access to cables

If you are installing a single Avaya Ethernet Routing Switch on a table or shelf, ensure the

surface can support at least 21 to 33 pounds (9.5 to 15 kilograms).

Installing the switch on a table or shelf

You can install a single Avaya Ethernet Routing Switch on any flat surface that can safely

support the weight of the switch and attached cables (21 to 33 pounds or 9.5 to 15

kilograms).

December 2013