Lexmark C925 Administrator's Manual - Page 7

Browse online or download pdf Administrator's Manual for Printer Lexmark C925. Lexmark C925 12 pages. Setup sheet
Also for Lexmark C925: Administrator's Manual (20 pages), Connection Manual (7 pages), Release Note (4 pages), Administrator's Manual (13 pages), Maintenance Manual (15 pages), Manual (14 pages), Administrator's Manual (12 pages), Quick Reference (10 pages), Paper Manual (3 pages), Menu Map (2 pages), Moving Manual (2 pages), Supplies Manual (2 pages), Information Manual (1 pages), Print Defects Manual (1 pages), Installation (2 pages), Quick Reference (12 pages), Service Training (18 pages)

Print Page
Lexmark C925 Administrator's Manual
Using a network license
Copying the license file to the Lexmark License Server
Note: Before installing a network license, copy the license files to the license server.
1
Copy the license file to the following directory on the network license server:
C:\Program Files\Lexmark\LicenseServer\Licenses
2
On the host computer, open the Control Panel.
3
Under Administrative Tools, click Services.
4
Select License Server.
5
Stop and then restart the License Server service.
Configuring the network license
1
From the Embedded Web Server, do one of the following:
•
Click Settings > Device Solutions >Embedded Solutions.
•
Click Settings or Configuration >Embedded Solutions.
2
Click Network License.
3
Enter the IP address or hostname and optional port for the network license server where the license is stored. You
can enter values for up to three separate servers.
4
Specify the Heartbeat Period (2–60 minutes), to designate how often the printer will contact the network license
server to check for updates and maintain access to an electronic license.
5
Specify the Number of Retries (1–5), to set the maximum number of times the printer can attempt to obtain a
license before quitting.
6
Click Apply.
Updating the network license
1
From the Embedded Web Server, do one of the following:
•
Click Settings > Device Solutions >Embedded Solutions.
•
Click Settings or Configuration >Embedded Solutions.
2
Under Installed Solutions, click the name of the application you are licensing.
3
Click License.
4
Click Update License.
5
Select Network.
6
Click Update License.
Configuring the application
7