Gardena FFP 3000 Operating Instructions Manual - Page 3
Browse online or download pdf Operating Instructions Manual for Water Pump Gardena FFP 3000. Gardena FFP 3000 10 pages. Underwater filter with fountain pump set
Also for Gardena FFP 3000: Operating Instructions Manual (11 pages)
Print Page
The pump must not be operated when there
are people in the water. Swimming pools and
garden ponds should be designed according
to international and national design regula-
tions.
v Please consult a professional electrician.
For Austria :
Pumps for use on swimming pools and on
ponds may only be operated via an isolating
transformer.
v Please consult a professional electrician.
For Switzerland :
In Switzerland mobile appliances which are
used outdoors, must be connected via a
residual-current device.
Note :
Do not allow the pump to run without
water because dry-running leads to an
3. Assembly
Installing the Pond Filter :
6
z
O
A Fit the Fountain to the Pond Filter :
1. Click the nozzle tube
3
2. Screw the nozzle tube
3. Screw the desired fountain insert
nozzle tube
1
2
a) Cascade
5
4
Side outlet
4
connected to the side outlet
quantity of water can be adjusted via the regulator
B Fit the stepped nipple (
The stepped nipple
stream or a source stone.
1. Screw the stepped nipple
pump, having first checked that the O-Ring
within the stepped nipple.
2. Push the hose on to the stepped nipple
Note : If a 3 /4" hose is used, the front part of the stepped nipple
can be cut off using a saw.
undesirable build up of heat and will
destroy the pump.
Before operating the pump, look to see if there
is any damage to the pump (esp. regarding
power cable and plug). The connection cable
of the pump cannot be replaced. If the cable is
damaged the pump must be scrapped.
Do not use the power cable to carry the pump
or to pull the plug out of the socket.
Protect the power cable from heat, oil and
sharp edges.
The temperature of the liquid used must not
be below 4 °C or above 35 °C.
Sand and other abrasive substances in the
liquid cause increased wear and reduce the
output of the pump.
Please observe the local noise prevention
regulations.
1
into the ball joint
1
on the threaded spigot on the pump.
3
1
.
b) Water Bell
b) Fleur-de-Lis d) Water Jets
: Additional consumers (e.g. gargoyles) can be
4
[9 mm / 13 mm (1/ 2 ")]. The
- 3 /4
1/ 2"
6
can be used to supply features such as a
6
on the threaded spigot on the
2
.
a) / b) / c) / d) into the
5
.
) to the Pond Filter :
"
z
O
is in place
6
.
9