Gardena WP 600 Operating Instruction - Page 4

Browse online or download pdf Operating Instruction for Water Pump Gardena WP 600. Gardena WP 600 8 pages. Fountain pump 12 v
Also for Gardena WP 600: Operating Instructions Manual (8 pages), User Manual (6 pages), Operating Instructions Manual (7 pages)

Print Page

Check line voltage

Check line voltage. Data indicated on the type plate must match

technical data of the mains supply.

Do not operate pump

The pump must not be operated when there are people in the

when there are people

water.

in the water

Swimming pools

Swimming pools and garden ponds should be designed accord-

and garden ponds

ing to international and national design regulations. Please

consult a professional electrician.

Do not use power cable

Do not use the power cable to carry the pump or to pull the plug

to carry the pump

out of the socket. Protect the power cable from heat, oil and

sharp edges.

Disconnect plug

Please unplug the pump after operation and before carrying out

any maintenance works.

Temperature of the liquid

The temperature of the liquid used must not be below 4 °C or

used

above 35 °C.

Wear and reduced

Sand and other abrasive substances in the liquid cause in-

output

creased wear and reduce the output of the pump.

Caution !

GARDENA pumps and plug connections have been designed

12 V low voltage

exclusively for the use with 12 V low voltage. When connected

to 230 V your life is at risk! Operate the pump only with the

delivered transformer.

Do not expose the

Do not expose the transformer to direct sunlight.

transformer to sunlight

To place the transformer

Ensure that the transformer is positioned in a place safe from

flooding and at least 2 m away from the edge of the pond.

Observe local noise

Please observe the local noise prevention regulations.

prevention regulations

Applications:

Examples – System Extensions – Product Recommendations

➔ Example for application:

Water jets for

26,5 mm (G 3 /4) thread

Water jets may be integrated into water features.

connections

Model

Cascade

Water

Bell

Art.

7814 *

7816

No.

× ×

WP 600, 12 V

7850

× ×

WP 1200, 12 V

7856

* contained in delivery volume

Foaming

Water

Water-

Cascade

Jet Spray Fleur-de-Lis

fall

Rotating

7818

7820

7822

7823

× ×

–

× ×

➔ Example for application:

Adaptable lamps

Underwater lighting of water jets and pond edges.

➔ Products:

GARDENA Underwater Light

GARDENA lightline Transformers

➔ Example for application:

Light / Fountain Nozzle

For installation in ponds and fountains.

➔ Product:

GARDENA Light / Fountain Nozzle

➔ Example for application:

Remote control

For operating water jets from the comfort of your patio or

your living room.

➔ Products:

GARDENA Remote Control Set

GARDENA Remote Control Socket

➔ Example for application:

Pond aeration

To aerate the pond.

➔ Product :

GARDENA Pond Aerator

Filling the filter tank

Zeolith fulfils the following functions:

with zeolith

Filters the water (➔ protection for the pump).

Bonds with excessive nutrients and causes their decomposition

by bacteria (➔ Ion exchange and the bonding of e.g. nitrate).

Helps to keep the pond clean and maintain the biological

balance.

Provides stability for the pump

GARDENA Zeolith, 1 l

GARDENA Zeolith, 5 l

Note :

To ensure the zeolith functions correctly, we recommend you

replace or clean it every 6 months (e.g. in salt water).

Information

Always unplug the pump first before working on it.

Before assembling system extensions first unscrew the pre-

assembled cascade and if necessary also the telescopic tube

of the pump and then screw one of the water jets on again

(➔ the ball-and-socket joint ensures that the water jet is

vertical).

Follow the Safety and Assembly Information attached to the

operating instructions.

Art. No. 7951

Art. No. 7953

Art. No. 7874

Art. No. 7875

Art. No. 7936

Art. No. 7914

Art. No. 7915