KitchenAid KICU265HBT1 Installation Instructions And Use And Care Manual - Page 4
Browse online or download pdf Installation Instructions And Use And Care Manual for Ventilation Hood KitchenAid KICU265HBT1. KitchenAid KICU265HBT1 13 pages. 36", 48" island canopy range hood
Also for KitchenAid KICU265HBT1: Parts Manual (4 pages)
Print Page
Venting methods
This island canopy range hood is
factory set for venting through the roof
or wall. For non-vented (recirculating)
installations, see "Non-Vented
(Recirculating) Kits" on back page.
Vent system needed for installation is
not included. 3-1/4" x 10" (8.3 crn x
25 crn) rectangular, 7" (178 crn) round,
8" (20.3 crn) round or 9" (22.9 crn)
round vent may be used.The hood
exhaust opening is 3-1/4" x 10"
(8.3 crn x 25 crn).
Ventwork can terminate either through
the roof or wall. To vent through a
wall, a 90° elbow is needed.
The vent system length should not
exceed the lengths shown in the chart
below.
Vent size
Maximum length
3-1/4" x 10"
35 ft. (10.7 m)
(8.3 cm x 25 cm)
7" (17.8cm) round
40 ft. (12.2 m)
8" (20.3 cm) round
50 ft. (15.2 m)
9" (22.9 cm) round
60 ft. (18.3 m)
Vertical roof venting
roofcap
Horizontal
wail venting
3-1/4"
x 10"
cm x 25 cm)
3-1/4" x 10"
through
(8.3 cmx
25 cm)
the roof
through
the wall
\
jJ
Note: 3-1/4"
x 10" (8.3 cmx
25 cm)
rectangular
vent must be used inside
chimney cover. Round vent wiJJ net fit
inside chimney cover.
wall
cap
Calculating the vent system length
To calculate the length of the system
you need, add the equivalent feet for
each vent piece used in the system.
Vent Piece
45° elbow
90° elbow
90° flat elbow
transition to round
wall cap
3-1/4" x 10" (8.3 cm x 25 cm}
Rectangular
7.0feet
(2.1 m)
5.0 feet
(1.5 m)
12.0 feet
(3.7 m)
5.0 feet
(1.5 m)
0.0 feet
(0.0 m)
7" (17.8crn), 8" (20.3 cm)
or g" (22.9 cm} Round
2.5 feet
(0.8 cm)
5.0 feet
(1.5 m)
3-1/4" x 10" (8.3 crn x 25 crn)
vent system
3-1/4"
x 10"
wamm
(8,3 cmx 25 cm)
embow
cap
Maximum length
1 - 90 ° elbow
8 ft. (2.4 m) straight
1 - wall cap
Length of 3-1/4" x 10"
(8.3 cm x 25 cm)
system
= 35 ft. (10.7 rn)
= 5 ft. (1.5 m)
= 8 ft. (2.4 m)
= 0 ft. (0 m)
= 13 ft. (4 m)
Note: Flexible vent is Not
recommended.
If it is used, each foot of flexible vent
used is equivalent to two feet (61 cm)
of straight metal vent when
calculating the vent system length.
(Example: A flexible elbow equals two
standard elbows.)