Gardena WSP 7000 Operating Instructions Manual - Page 4

Browse online or download pdf Operating Instructions Manual for Water Pump Gardena WSP 7000. Gardena WSP 7000 8 pages. Submersible pump / dirty water pump
Also for Gardena WSP 7000: Operating Instructions Manual (14 pages), Operating Instructions Manual (14 pages)

Print Page

Gardena WSP 7000 Operating Instructions Manual

Check line voltage

Check line voltage. Data indicated on the type plate must match

technical data of the mains supply.

Do not operate pump

The pump must not be operated when there are people in the

when there are people

water.

in the water

Garden ponds

Garden ponds should be designed according to international

and national design regulations. Please consult a professional

electrician.

Do not use power cable

Do not use the power cable to carry the pump or to pull the plug

to carry the pump

out of the socket. Protect the power cable from heat, oil and

sharp edges.

Disconnect plug

Please unplug the pump after operation and before carrying out

any maintenance works.

Temperature of the liquid

The temperature of the liquid used must not be below 4 °C or

used

above 35 °C.

Wear and reduced

Sand and other abrasive substances in the liquid cause in-

output

creased wear and reduce the output of the pump.

Observe local noise

Please observe the local noise prevention regulations.

prevention regulations

Applications:

Examples – System Extensions – Product Recommendations

➔ Example for application:

Water jets for 33.3 mm (G 1)

thread connections

Water jets may be integrated into water features.

Model

Cascade

Water

Bell

Art.

7815

7817

No.

× ×

WSP 4000

7860

× ×

WSP 7000

7861

➔ Example for application:

Adaptable lamps

Underwater lighting of water jets and pond edges.

➔ Products:

GARDENA Underwater lights

GARDENA lightline Transformers

➔ Example for application:

Light / Fountain Nozzle

For installation in ponds and fountains.

➔ Product:

GARDENA Light / Fountain Nozzle

➔ Example for application:

Remote control

For operating water jets from the comfort of your patio

or your living room.

Foaming

Water

Water-

Cascade

Jet Spray Fleur-de-Lis

fall

rotating

7819

7821

7822

7823

× ×

Art. No. 7951

Art. No. 7953

➔ Products:

GARDENA Remote Control Set

GARDENA Remote Control Socket

➔ Example for application:

Pond aeration

To aerate the pond.

➔ Product :

GARDENA Pond Aerator

Filling the filter tank

Zeolith fulfils the following functions:

with zeolith

Filters the water (➔ protection for the pump).

Bonds with excessive nutrients and causes their decomposition

by bacteria (➔ Ion exchange and the bonding of e.g. nitrate).

Helps to keep the pond clean and maintain the biological balance.

Provides stability for the pump

GARDENA Zeolith, 1 l

GARDENA Zeolith, 5 l

Note :

To ensure the zeolith functions correctly, we recommend you

replace or clean it every 6 months (e.g. in salt water).

Information

Always unplug the pump first before working on it.

The ball-and-socket joint ensures that the water jet is vertical.

Follow the Safety and Assembly Information attached to the

operating instructions.

Operation

➔ Press ball-and-socket joint on straight to ensure O-ring fits

Attaching ball-and-socket

joint

correctly.

Installing the pump

1. Remove the pump from the filter basket and screw the regulator

supplied onto the second opening of the pump up to the limit

stop (➔ max. delivery capacity on the vertical outlet). Then

replace the pump in the filter basket.

2. Put the pump on a stable base to ensure that the upper edge

of the filter tank is completely immersed in water.

Pay attention to

Please note the maximum submersion depth (see "Technical Data").

minimum water depth

Starting the pump

Connect the power cable to a 230 V AC socket.

Caution! Pump will start running immediately!

Avoid dry operation

Avoid dry operation of the pump as dry running will produce

undesirable heat and destroy the pump.

Art. No. 7874

Art. No. 7875

Art. No. 7936

Art. No. 7914

Art. No. 7915